Any recommendations on a stand that I can use to place the Korg M3 module over my other (main) keyboard?
Thank you
Xavier
Stand for Korg M3 Module?
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Stand for Korg M3 Module?
Current Gear: Korg M3-73; PA 588, Boss BR-600
I use an On Stage 2nd Tier stand that fits any standard keyboard stand. I was hesitant to use one at first because of the weight being maxed out as per the 2nd Tier's specs, but I've had zero issues with slipping in the 2+ years I've had it up. If your keyboard is on a desktop you'll have to come up with something else.
-
iowagold
- Approved Merchant
- Posts: 323
- Joined: Mon Nov 11, 2013 5:40 pm
- Location: in an alternate time line
- Contact:
on stage gear rocks for sure!!
on stage gear rocks for sure!!
I use them for all my studio rooms.
if you plan right and are good with tools you can go 4 high on them.
I use guitar amp 4x12 cabs under the 4 leg On-Stage Stands KS7150 Platform Style Keyboard Stand
https://www.sweetwater.com/store/detail/PlatformStd
then use the On-Stage Stands KSA7500 Universal 2nd Tier
https://www.sweetwater.com/store/detail/2ndTier
and use blue Loctite on the threads for studio.
then I have modified the 2nd tier for shorter arms to make sure the upper key bed misses the lower key bed controls.
88 key lower, 61 key upper.
then I have done a custom mod on another second tier to make it for standard rack width.
pretty cool and stable with the cab weight on the bottom of the platform stand
no movement while playing!!
I have 3 of these in a u shape to get the key beds and the controllers
all in the same area...
and places the modules and midi switches right over the controller's.
I use them for all my studio rooms.
if you plan right and are good with tools you can go 4 high on them.
I use guitar amp 4x12 cabs under the 4 leg On-Stage Stands KS7150 Platform Style Keyboard Stand
https://www.sweetwater.com/store/detail/PlatformStd
then use the On-Stage Stands KSA7500 Universal 2nd Tier
https://www.sweetwater.com/store/detail/2ndTier
and use blue Loctite on the threads for studio.
then I have modified the 2nd tier for shorter arms to make sure the upper key bed misses the lower key bed controls.
88 key lower, 61 key upper.
then I have done a custom mod on another second tier to make it for standard rack width.
pretty cool and stable with the cab weight on the bottom of the platform stand
no movement while playing!!
I have 3 of these in a u shape to get the key beds and the controllers
all in the same area...
and places the modules and midi switches right over the controller's.
my site klimaco.net
Current Gear: korg m3 expanded radias firewire 88 key Radias r on mat, korg radias r on mat on 61 key bed, Korg triton rack w 96mb ram scsi port, 5) korg RADIAS-R on big rack, korg kaossilator pro plus, 6) roland integra7, 4 Roland sc55, 2 roland sb55, 5) fostex 2016, behringer fx2000, 2) roland a800 pro, 2) roland a88 and 2) a49, roland juno, Doepfer MAQ 16/3, 2 Manikin Electronic Schrittmacher, most soft synths. cake walk all old and new versions.
3 schecter guitars, 3 elevenracks, most mxr effects, 2 zoom r24, avid pro tools 11.
MRT midi Breath Controller. 6 studio rooms.
Current Gear: korg m3 expanded radias firewire 88 key Radias r on mat, korg radias r on mat on 61 key bed, Korg triton rack w 96mb ram scsi port, 5) korg RADIAS-R on big rack, korg kaossilator pro plus, 6) roland integra7, 4 Roland sc55, 2 roland sb55, 5) fostex 2016, behringer fx2000, 2) roland a800 pro, 2) roland a88 and 2) a49, roland juno, Doepfer MAQ 16/3, 2 Manikin Electronic Schrittmacher, most soft synths. cake walk all old and new versions.
3 schecter guitars, 3 elevenracks, most mxr effects, 2 zoom r24, avid pro tools 11.
MRT midi Breath Controller. 6 studio rooms.