Korg EMX-1 Error

Discussion relating to the Korg Electribe products.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
ics
Posts: 11
Joined: Fri Apr 17, 2015 9:00 am
Location: Romania
Contact:

Korg EMX-1 Error

Post by ics »

Hello
I have a strange error from my EMX-1 and i don't know what is is. When i power it on, the screen displays SMInitEr IPLMod. Strange thing is that i didn't find anyhtning on the web or in the service manual. Any ideeas? Thank you
voip
Platinum Member
Posts: 4015
Joined: Thu Nov 27, 2014 2:07 pm

Post by voip »

Is a Smart Media card present in the memory card slot? If so, try powering up without it.
ics
Posts: 11
Joined: Fri Apr 17, 2015 9:00 am
Location: Romania
Contact:

Post by ics »

No, i don't use Smart Media. Now that you've mentioned it, the SM in the error could be related to Smart Media. But the slot is empty, i don't use it
ics
Posts: 11
Joined: Fri Apr 17, 2015 9:00 am
Location: Romania
Contact:

Post by ics »

Hello guys. I solved my problem that same day but i forgot to write here. Anyway, the error was caused by the conductive paint peeling of from the buttons. I used it to repair the contacts but it didn't grip unfortunatelly. I found a better solution: remote control repair kit. It has small graphite "buttons" and a silicone tube and you apply them on the buttons. So far all good. Thanks
Post Reply

Return to “Korg Electribe”