Hi folks,
Wondering if you could help me out with my RADIAS? I love the thing, but it will not, for some reason, transmit MIDI over USB. In fact, my mac won't even register that it's been connected.
I've got the sound editor working fine, got the latest Korg-USB drivers installed. Doesn't pop up in the MIDI window.
It transmits and receives MIDI over DIN no problem, but I can't use the sound editor via DIN as it's going through a cheapo interface (that I'm using purely for the MIDI ports).
Funny thing is, a mate has a new ARP Odyssey, and it works fine on my mac. Also, the firmware on the RADIAS is 2.0, so somebody has definitely used the USB connection before.
Any bright ideas?
RADIAS not being recognised - at all
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
iowagold
- Approved Merchant
- Posts: 323
- Joined: Mon Nov 11, 2013 5:40 pm
- Location: in an alternate time line
- Contact:
save your settings and reset the unit
save your settings and reset the unit.
or go through all the global settings one by one...
there has to be a soft switch set wrong...
what exactly are you trying to do???
do you have a midi 5 pin cord to usb also in your studio??
you might try that...
just remember any other gear in the midi chain might cause time delay in midi stream...
I use only 5 pin midi here in the studio...
lol
if you give up on the radias let me know
i need 2 more of them here!!
or go through all the global settings one by one...
there has to be a soft switch set wrong...
what exactly are you trying to do???
do you have a midi 5 pin cord to usb also in your studio??
you might try that...
just remember any other gear in the midi chain might cause time delay in midi stream...
I use only 5 pin midi here in the studio...
lol
if you give up on the radias let me know
i need 2 more of them here!!
my site klimaco.net
Current Gear: korg m3 expanded radias firewire 88 key Radias r on mat, korg radias r on mat on 61 key bed, Korg triton rack w 96mb ram scsi port, 5) korg RADIAS-R on big rack, korg kaossilator pro plus, 6) roland integra7, 4 Roland sc55, 2 roland sb55, 5) fostex 2016, behringer fx2000, 2) roland a800 pro, 2) roland a88 and 2) a49, roland juno, Doepfer MAQ 16/3, 2 Manikin Electronic Schrittmacher, most soft synths. cake walk all old and new versions.
3 schecter guitars, 3 elevenracks, most mxr effects, 2 zoom r24, avid pro tools 11.
MRT midi Breath Controller. 6 studio rooms.
Current Gear: korg m3 expanded radias firewire 88 key Radias r on mat, korg radias r on mat on 61 key bed, Korg triton rack w 96mb ram scsi port, 5) korg RADIAS-R on big rack, korg kaossilator pro plus, 6) roland integra7, 4 Roland sc55, 2 roland sb55, 5) fostex 2016, behringer fx2000, 2) roland a800 pro, 2) roland a88 and 2) a49, roland juno, Doepfer MAQ 16/3, 2 Manikin Electronic Schrittmacher, most soft synths. cake walk all old and new versions.
3 schecter guitars, 3 elevenracks, most mxr effects, 2 zoom r24, avid pro tools 11.
MRT midi Breath Controller. 6 studio rooms.
I'm simply trying to get my mac to recognise that I've plugged the RADIAS in AT ALL, so I can use the sound editor (which appears to work fine by itself, I it just can't find the RADIAS to connect to) and play it via MIDI from Ableton using only a USB cable.
There is nothing else in the MIDI chain, good quality cable plugged directly into the USB port on the mac. I've checked and re-checked that routing is set to USB+MIDI in the global settings. Memory protect is off. SystemEx is set to o. I've done a factory reset. I've deleted every other MIDI driver I can find.
The only thing I can get it to do is send and receive MIDI notes via a reaaally cheap and horrendous MIDI-USB interface that my housemate lent me (one of these guys http://www.cccme.org.cn/products/detail-3093881.aspx) but it does not appear as RADIAS in the Audio-MIDI settings, nor can the Korg System Updater or Sound Editor find it.
Again, I was pretty surprised that ARP Odyssey popped up straight away. I have to assume it's an issue with the RADIAS not being compatible with the drivers any more. I'm pretty much out of ideas.
There is nothing else in the MIDI chain, good quality cable plugged directly into the USB port on the mac. I've checked and re-checked that routing is set to USB+MIDI in the global settings. Memory protect is off. SystemEx is set to o. I've done a factory reset. I've deleted every other MIDI driver I can find.
The only thing I can get it to do is send and receive MIDI notes via a reaaally cheap and horrendous MIDI-USB interface that my housemate lent me (one of these guys http://www.cccme.org.cn/products/detail-3093881.aspx) but it does not appear as RADIAS in the Audio-MIDI settings, nor can the Korg System Updater or Sound Editor find it.
Again, I was pretty surprised that ARP Odyssey popped up straight away. I have to assume it's an issue with the RADIAS not being compatible with the drivers any more. I'm pretty much out of ideas.