My first post for Korg PA1000 .

For discussion relating to Korg PA1000 and PA700 arrangers

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
User avatar
Lika
Platinum Member
Posts: 544
Joined: Mon Apr 02, 2007 8:50 pm
Location: Greece

My first post for Korg PA1000 .

Post by Lika »

Hello .

Let me say a few words about the PA1000, which I have couple of days.

Well, let me start with the positive ones.

1.Construction - very good.

2. Sounds - very good.

3.Responding very fast at all.

4.Keybed - well (like PA900)

5.Works impeccably with Korg nanoKontrol2.

6.The insert FX is very useful !!!

7.The screen responds very well.

It has other things well, but I will tell another time :) .

The negatives .

1.Black buttons on black background. :(
If you're in a little dark place - you do not see anything !!!
It does not help even the backlight.

2.The Set List gets confused all the time.

3. The Songbook does not have Select option.

I found some Bugs :)
I would ask Moderator to do so
"Sticky - Korg Pa1000 OS V1.0.1 POTENTIAL BUG REPORT
(monitored topic)."

Thanks :)
http://www.youtube.com/user/mklika66
Korg PA1000
---------------------------------------------
Make Music !!!
Biggles
Platinum Member
Posts: 1059
Joined: Thu Aug 31, 2017 6:28 pm

Post by Biggles »

Can you expand on the negatives 2 and 3
Biggles
Lancashire, UK
User avatar
Lika
Platinum Member
Posts: 544
Joined: Mon Apr 02, 2007 8:50 pm
Location: Greece

Post by Lika »

Hi Biggles

For me it is a bug :)

4.The Set List does not work correctly , when you press for two times Set List button it not leave from the screen and you must press Exit to leave. If you have pressed Set List and by accident press Exit when you are on Set List, Set List remains active , and you will have troubles :) ...

Other thing answer is here :)

http://www.korgforums.com/forum/phpBB2/ ... highlight=

Thanks :)
http://www.youtube.com/user/mklika66
Korg PA1000
---------------------------------------------
Make Music !!!
Post Reply

Return to “Korg PA1000/PA700”