Leslie speaker simulation pedal

Badplaya · Post by **Badplaya** » Fri May 25, 2018 4:41 pm

Hey everyone! Just wondering if anyone has had any experience with using a Leslie simulation pedal vs the on board leslie. Specifically it's there anything better in a pedal than what the Kronos hard offers sound wise?

NormC · Post by **NormC** » Fri May 25, 2018 6:09 pm

Badplaya wrote:Hey everyone! Just wondering if anyone has had any experience with using a Leslie simulation pedal vs the on board leslie. Specifically it's there anything better in a pedal than what the Kronos hard offers sound wise?

This is most people's go to unit:
http://www.neo-instruments.de/en/ventil ... r-features

geoelectro · Post by **geoelectro** » Fri May 25, 2018 11:52 pm

I use the Ventilator II. I route the organ sound (dry) out individual output 1 to the Ventilator. I take the Vent outputs (stereo) and run them back into the Kronos audio inputs. There I can set the levels and add FX's like reverb etc. (You can also do that before sending it out)

I have the Vent on the floor and use a foot pedal plugged into the vent. I like the pedal to be momentary, fast while pressing and slow when released.

It sounds fantastic!

Geo

Zippydog · Post by **Zippydog** » Sat May 26, 2018 1:22 am

+1 for the vent. Amazing pedal. That said, I sold mine to keep it simple with onboard Leslie. If it’s an external pedal you seek, the Vent is it.

Badplaya · Post by **Badplaya** » Sat May 26, 2018 2:10 am

Thank you guys for your help! A rare unanimous agreement! I guess the vent it is

laandodeman · Post by **laandodeman** » Sat May 26, 2018 11:55 am

I love the vent for the Leslie. The drive is so so.

Leslie (and even the drive) are way better than the ones on board of the Kronos

laandodeman · Post by **laandodeman** » Sat May 26, 2018 11:56 am

geoelectro wrote:I like the pedal to be momentary, fast while pressing and slow when released.

Geo

What pedal do you use for that Geoelectro?

Any pedal I use seems to put it in fast mode. Slow is not possible anymore

geoelectro · Post by **geoelectro** » Sat May 26, 2018 12:31 pm

I custom wired a pedal. I'll have to look up the specs again. You also have to put the Vent in a certain mode as well. I'll try to get back with it when I have more time.

Geo

laandodeman · Post by **laandodeman** » Sun May 27, 2018 9:20 am

Would be nice to have the wiring schedule Geo!

Korg Forums

Leslie speaker simulation pedal

Leslie speaker simulation pedal

Re: Leslie speaker simulation pedal