I want to use a Previa, 88-note KB as an external Midi source to the Pa3x but have been unable to use the Previa as a substitute to the Pa3X KB. The Previa KB will not control chords in the split mode or transpose using the Pa3x Transpose buttons. Obviously, I need to set up the midi control parameters to do this, but have not found the manuals any help or relateable.
Anyone out there who can help?
Using an 88-note keyboard with the Pa3X
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
mentoragency
- Posts: 1
- Joined: Sun Jan 20, 2019 12:52 am
- Location: Houston, Texas
- Contact:
Using an 88-note keyboard with the Pa3X
Never mind about the moon
Hello!
The procedure to use "Privia" as a Master Keyboard is this:
In Style Play mode on Pa3x:
1) Select GLOBAL
2) Select MENU
3) Select MIDI
4) Select "Current Midi Setup" on 02 Master kbd "
5) Select the second "Midi In control" window
6) Select "CHORD 1 MIDI CHANNEL" and enter the value at 0 "
7) Select "Write Global-MIDI setup at the top right and select OK
8) Select "EXIT"
9) Select at the top right "Write Global -Style Play Setup and select ok.
Point 9 is essential so that when the Pa3x is restarted the settings will remain saved
Best regards
The procedure to use "Privia" as a Master Keyboard is this:
In Style Play mode on Pa3x:
1) Select GLOBAL
2) Select MENU
3) Select MIDI
4) Select "Current Midi Setup" on 02 Master kbd "
5) Select the second "Midi In control" window
6) Select "CHORD 1 MIDI CHANNEL" and enter the value at 0 "
7) Select "Write Global-MIDI setup at the top right and select OK
8) Select "EXIT"
9) Select at the top right "Write Global -Style Play Setup and select ok.
Point 9 is essential so that when the Pa3x is restarted the settings will remain saved
Best regards
La musica è vita!
-
karmathanever
- Platinum Member
- Posts: 10493
- Joined: Mon Jan 12, 2004 5:07 am
