I'm interested in the Volca Modular but I found limited a single attenuator.
I know I should be able to use the Low Pass Gate as attenuator with a suttle change of the modulation I would like a confirmation from the Volca Modular users.
If you can post audio/video will be awesome.
Volca Modular LPG as Attenuator
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Hi,
That's an interesting thought. I've tried, with little success, but I may not be doing it right...
I took an output from the Woggle into the Split, then out of the Split to the Pitch input on the oscillator. That gives the typical random notes as the sequencer runs. Then I moved the in/out wires from the Split to the (Audio) In and output of the 2nd LPG. The notes went back to their normal sequenced tones. I turned the knob of the LPG: no change. I fed the output of the Utility into the LPG control and adjusted the Utility gain (which defeats your purpose). THAT did change the sound slightly: the tones were the same (not random), but there was a 'pluck' at the start of each note.
If that's not clear (I'll try to include a pic), let me know. Or if there's a better way to test it.
(Evidently I can't copy/paste a pic? Do I have to have it hosted somewhere else? Haven't used this forum much yet.)
[/img]
That's an interesting thought. I've tried, with little success, but I may not be doing it right...
I took an output from the Woggle into the Split, then out of the Split to the Pitch input on the oscillator. That gives the typical random notes as the sequencer runs. Then I moved the in/out wires from the Split to the (Audio) In and output of the 2nd LPG. The notes went back to their normal sequenced tones. I turned the knob of the LPG: no change. I fed the output of the Utility into the LPG control and adjusted the Utility gain (which defeats your purpose). THAT did change the sound slightly: the tones were the same (not random), but there was a 'pluck' at the start of each note.
If that's not clear (I'll try to include a pic), let me know. Or if there's a better way to test it.
(Evidently I can't copy/paste a pic? Do I have to have it hosted somewhere else? Haven't used this forum much yet.)
[/img]
Thank you so much mate. You can might send an image by pribatr message. It seem you did everything right. You could try to loop the second function generator take the out to the LPG out to pitch or whatever and see how it behave by adjusting the LPG knob.tpugsley wrote:Hi,
That's an interesting thought. I've tried, with little success, but I may not be doing it right...
I took an output from the Woggle into the Split, then out of the Split to the Pitch input on the oscillator. That gives the typical random notes as the sequencer runs. Then I moved the in/out wires from the Split to the (Audio) In and output of the 2nd LPG. The notes went back to their normal sequenced tones. I turned the knob of the LPG: no change. I fed the output of the Utility into the LPG control and adjusted the Utility gain (which defeats your purpose). THAT did change the sound slightly: the tones were the same (not random), but there was a 'pluck' at the start of each note.
If that's not clear (I'll try to include a pic), let me know. Or if there's a better way to test it.
(Evidently I can't copy/paste a pic? Do I have to have it hosted somewhere else? Haven't used this forum much yet.)
[/img]
Thanks again I truly appreciate it.