Korg Kronos 2 88 Front Fender Replacement

omkar.sunkersett · Post by **omkar.sunkersett** » Thu Apr 30, 2020 3:30 am

Where do you buy a new front fender for the Korg Kronos 2 88 if the front fender has a dent?

JFree · Post by **JFree** » Thu Apr 30, 2020 8:27 pm

Rockauto.com

average_male · Post by **average_male** » Thu Apr 30, 2020 8:50 pm

JFree wrote:Rockauto.com

Not cool. Guy is looking for help, not abuse.

GregC · Post by **GregC** » Fri May 01, 2020 1:32 am

If I understand I think the part is an end cheek to the chassis.

if you have a K2 my guess its wood

omkar.sunkersett · Post by **omkar.sunkersett** » Fri May 01, 2020 2:56 am

@GregC,

I am talking about the front metal bar that covers the keybed assembly on the K2 88.

I looked online and it is out of stock everywhere.

voip · Post by **voip** » Fri May 01, 2020 9:00 am

How bad is the dent? Can it be knocked out? Automobile panel beaters can do amazing things with bodywork.

.

omkar.sunkersett · Post by **omkar.sunkersett** » Fri May 01, 2020 11:11 am

voip wrote:How bad is the dent? Can it be knocked out? Automobile panel beaters can do amazing things with bodywork.

.

You got to be kidding lolz. Here is a photo of the dent —

https://drive.google.com/file/d/11aHOD_ ... p=drivesdk

voip · Post by **voip** » Fri May 01, 2020 11:32 am

Hmm, that's a very strange image format!! Nothing to see here. Not running Win10, so needed conversion to .jpg.

The dent in the image would not be a problem for an auto repair shop.

.

Sweat · Post by **Sweat** » Fri May 01, 2020 2:29 pm

Have you tried this place. Not sure if this is the correct part since there is no image available, but you could contact them.
https://www.partsisparts.net/catalog/ko ... 0642000032

GregC · Post by **GregC** » Fri May 01, 2020 3:55 pm

I am unclear on the exact problem.

Is the k2 a recent purchase and was it presented as ' new ' ?

If so, you have a case against the seller or store.

omkar.sunkersett · Post by **omkar.sunkersett** » Fri May 01, 2020 5:28 pm

GregC wrote:I am unclear on the exact problem.

Is the k2 a recent purchase and was it presented as ' new ' ?

If so, you have a case against the seller or store.

It’s a lightly used Kronos2-88. I was given a partial refund for the dent to purchase a new front bar.

omkar.sunkersett · Post by **omkar.sunkersett** » Fri May 01, 2020 5:35 pm

Sweat wrote:Have you tried this place. Not sure if this is the correct part since there is no image available, but you could contact them.
https://www.partsisparts.net/catalog/ko ... 0642000032

Thank you.

average_male · Post by **average_male** » Fri May 01, 2020 5:45 pm

I had a similar issue and cut out a wooden mold to match the bumper angles /profile (external and internal) and pressed it with bench vise (and hammered the wooden block profile a bit) back into shape. Came out really good, but does take a bit of patience and little bit of skill or luck.

Nothing to lose given the item is OOS at the moment.