Resonance adjustment

cjban · Post by **cjban** » Thu Apr 08, 2021 7:50 pm

In some programs, the resonance is so high that speakers vibrate. Changing params doesn't deem to help. Does someone know which parameter needs adjusted to reduce resonance? A typical example is the Tabla sound. I have tried adjusting the head, and cut reverb, but they done seem to help.

voip · Post by **voip** » Thu Apr 08, 2021 8:59 pm

It could be an issue with the speakers. Do you hear the same vibration through headphones, for example?

.

cjban · Post by **cjban** » Fri Apr 09, 2021 1:13 am

voip wrote:It could be an issue with the speakers. Do you hear the same vibration through headphones, for example?

.

Resonance is high even in headphones. Vibration is not the main issue, just want to reduce the resonance a bit when hitting hard for some of the sounds..

voip · Post by **voip** » Fri Apr 09, 2021 8:47 am

There is a Damping parameter for the Tabla, available through the Edit mode, which may help. It is best to read the Parameter Guide, to better understand the adjustments available via Edit mode.

.

cjban · Post by **cjban** » Fri Apr 09, 2021 1:29 pm

voip wrote:There is a Damping parameter for the Tabla, available through the Edit mode, which may help. It is best to read the Parameter Guide, to better understand the adjustments available via Edit mode.

.

Thanks for mentioning this. I checked and realize Tabla has damping controls. Will try it out..