Hi Guys
Imported or loaded User sample sound files are editing and playing in the Sound /Recording menu (No problem in these menus), but there is no sound Style Play/Sound or in the program mode.
But I have to write ; This problem started power cord unplugged accidently
while restoring my backups
As far as I know I checked everything. ( Pa4x Resetted and Os system re loaded, restored factory data ,tested Ram ,, etc..) I didnt found anythings. My sample sound loading properly. there isnt any problem for my sample sound or my set.
Result ; Nothing has changed.
I waiting for your valuable comments.
Thanks...
User sample sound doesnt work correctly
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Solved
Solved (Accidently):
1) Pa4x resetted and Os 2.0 loaded again (For check sample for Os2.0. It
will it work or not???)
2) Load sample and check?.. Oww.. Worked!
3) Clear Ram and Load OS3.01 (Next) again
4) Load sample and Test again for OS3.01
5) What is the root problem but all user sample work.
Note:I repeated my operations on Pa4x at least 3 times in the same way. My source files were the same . Just as an additional process ; I tested whether it works by uploading sample sound in Os2.0. No other different operations
1) Pa4x resetted and Os 2.0 loaded again (For check sample for Os2.0. It
will it work or not???)
2) Load sample and check?.. Oww.. Worked!
3) Clear Ram and Load OS3.01 (Next) again
4) Load sample and Test again for OS3.01
5) What is the root problem but all user sample work.
Note:I repeated my operations on Pa4x at least 3 times in the same way. My source files were the same . Just as an additional process ; I tested whether it works by uploading sample sound in Os2.0. No other different operations