Help needed with assigning pitch bend to aftertouch...

[pax-eterna.1]

Can someone here assist with this please? Not very au faix with the Korg way of adding the controllers to a sound...

[AntonySharmman]

This function belongs to Advanced Edit procedure and can be done only in Sound Edit mode of a User Sound
so if factory one then copy it in a User Bank.

- You have to edit all melodic OSC you can find in this Sound (not FX/articulation OSC), use solo OSC function to explore them.
- While in every OSC to edit , go via menu to Pitch page and assign AMS to controller After Touch from scroll down menu
and set intensity to 2 value for a tone Up pitch bend.
- Do it for every relative OSC as described above and save Sound.

Study page 952 of latest Pa5X User manual v1.2


Hope this helps

[pax-eterna.1]

This function belongs to Advanced Edit procedure and can be done only in Sound Edit mode of a User Sound
so if factory one then copy it in a User Bank.

- You have to edit all melodic OSC you can find in this Sound (not FX/articulation OSC), use solo OSC function to explore them.
- While in every OSC to edit , go via menu to Pitch page and assign AMS to controller After Touch from scroll down menu
and set intensity to 2 value for a tone Up pitch bend.
- Do it for every relative OSC as described above and save Sound.

Study page 952 of latest Pa5X User manual v1.2


Hope this helps

Thanks much!