How to change octave of individual Upper parts?

bratan · Post by **bratan** » Sat Feb 17, 2024 3:35 pm

I need to change ocative of narrow area for example that's set to Upper1 region. Can't find a way to do this on PA5x. I've seen videos what show how to do it on older PA keyboards but not on this one...

DaPale · Post by **DaPale** » Sat Feb 17, 2024 4:58 pm

For a keyboardset you use the octave buttons for sounds in a keyboardset you have to use the Ensemble function. Strange but true

bratan · Post by **bratan** » Sat Feb 17, 2024 6:24 pm

I don't see a way to change octave in the Assemble Function. When I change the octave it changes it for all 3 Upper parts, but I just want to change it for each one separately...

DaPale · Post by **DaPale** » Sat Feb 17, 2024 6:28 pm

Choose shift + ensemble and go to the tab RangeVel
You the a matrix with first row TOP KEY and second row BOTTOM KEY

here you can set the ranges voor de three upper sounds.

AntonySharmman · Post by **AntonySharmman** » Sat Feb 17, 2024 6:34 pm

bratan wrote:I need to change octave of narrow area for example that's set to Upper1 region

Wrong page !
Menu > Mixer/FX > Bend/Tuning page , 2nd line #/b per upper/lower Sound.
Manual page 426 for details
Then use above page to define upper and lower limits per Sound element.

bratan · Post by **bratan** » Sat Feb 17, 2024 6:38 pm

AntonySharmman wrote:
bratan wrote:I need to change octave of narrow area for example that's set to Upper1 region
Wrong page !
Menu > Mixer/FX > Bend/Tuning page , 2nd line #/b per upper/lower Sound.
Manual page 426 for details
Then use above page to define upper and lower limits per Sound element.

This is it! Thank you!

DaPale · Post by **DaPale** » Sat Feb 17, 2024 6:44 pm

Sorry from me too. I read it wrong. Was focused on split points.