Hello,
I have a problem when I use the arpeggiator in combi mode. I would like to be able to let the arpeggiator play with the "latch" function on a certain part of the keyboard, and use my 2 hands to play another sound on another zone while keeping the arpeggiator running but this is not possible, as soon as I play on the other zone without holding the notes of the arpeggiator, it stops.
Did I forget a function?
Thank you in advance for your answers
Frédéric
ARP stops in split mode
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
Dan Stesco
- Approved Merchant
- Posts: 677
- Joined: Fri Dec 11, 2009 9:10 am
- Location: Bucharest
- Contact:
Hi Dan,
Thank you very much, yes I finally found the solution !
You have to go to ARP-DRUM, then "edit" and in the "Scene common setup" part, press "More" you then access the screen which offers split zones for the Arp 1 and Arp 2... and it works.
We must define the zone in which we want the arpeggio to play exclusively. it will remain on when playing in a zone for which it is not assigned.
thank you very much for your answer which allowed me to find the solution
Frédéric
Thank you very much, yes I finally found the solution !
You have to go to ARP-DRUM, then "edit" and in the "Scene common setup" part, press "More" you then access the screen which offers split zones for the Arp 1 and Arp 2... and it works.
We must define the zone in which we want the arpeggio to play exclusively. it will remain on when playing in a zone for which it is not assigned.
thank you very much for your answer which allowed me to find the solution
Frédéric
-
Dan Stesco
- Approved Merchant
- Posts: 677
- Joined: Fri Dec 11, 2009 9:10 am
- Location: Bucharest
- Contact:
I'm glad you find the solution 
.
Also you have to check the Timbre Zone Bypass. The arp must play in a full range, different of sound zone you already set to avoid the key playing for arp timbre.
For example the trig zone of bass is C-1 to B3. The bass timbre keyboards zone is C-1 to G9. The arp will trigged the timbre in the lower zone but will play on upper zone by your hand. You have to limit the timbre Zone from C-1 to C-1 to avoid any other key to play and check the Timbre Zone Bypass for arp pattern. Is the solution to have the ARP completely independent.
If is hard to understand what I mean please let me know. I could send a Combi example.
.Also you have to check the Timbre Zone Bypass. The arp must play in a full range, different of sound zone you already set to avoid the key playing for arp timbre.
For example the trig zone of bass is C-1 to B3. The bass timbre keyboards zone is C-1 to G9. The arp will trigged the timbre in the lower zone but will play on upper zone by your hand. You have to limit the timbre Zone from C-1 to C-1 to avoid any other key to play and check the Timbre Zone Bypass for arp pattern. Is the solution to have the ARP completely independent.
If is hard to understand what I mean please let me know. I could send a Combi example.