Kronos Touchscreen Review Resolution, size navigation???

StephenKay · Post by **StephenKay** » Fri Jun 17, 2011 6:03 pm

Lou wrote:
sparkie wrote:
Lou wrote:Why does it say 'Samples Not Loaded"?
I was in User G with nothing loaded there..
If I load the exact Bank, I do not get "No Samples Loaded?"

It would say "Samples Not Loaded" if he did not have the EXs containing the German Grand loaded at the time.

Lou · Post by **Lou** » Fri Jun 17, 2011 10:26 pm

Thanks Stephen.

Hal2001 · Post by **Hal2001** » Tue Jul 19, 2011 2:32 pm

taurgo Production wrote:

if that dont work do a factory reset that will work the best.
How is the factory reset done on the Kronos. I'm not finding it yet in the manual?

jimknopf · Post by **jimknopf** » Tue Jul 19, 2011 2:45 pm

Easy: you just load the factory pcg (Disk mode, Factory folder, preload.pcg).

Mark "all" for loading.

Hal2001 · Post by **Hal2001** » Tue Jul 19, 2011 2:59 pm

jimknopf wrote:Easy: you just load the factory pcg (Disk mode, Factory folder, preload.pcg).

I pressed Disk mode, selected Factory folder, and hit "Load" "Preload.pcg, restarted the Kronos, held my breath, and it worked. Thanks.

padking · Post by **padking** » Tue Jul 19, 2011 6:52 pm

I had my Kronos 61 for 5 days now and the
screen is really a pain, yesterday I worked on
correcting some combis (not to good by the way) and after 30 minutes tha, I had to
stop,my eyes where tired, I hope the editor
will help me with that problem.

Maybe my screen is not working good when
I touch it you can ear the beep but nothing
happens you have to do it again ????

I did calibrate the screen as suggested and the
brilliance is at max so what the......?

michelkeijzers · Post by **michelkeijzers** » Tue Jul 19, 2011 7:02 pm

padking wrote:I had my Kronos 61 for 5 days now and the
screen is really a pain, yesterday I worked on
correcting some combis (not to good by the way) and after 30 minutes tha, I had to
stop,my eyes where tired, I hope the editor
will help me with that problem.

Maybe my screen is not working good when
I touch it you can ear the beep but nothing
happens you have to do it again ????

I did calibrate the screen as suggested and the
brilliance is at max so what the......?

Padking: in another post you just mentioned you didn't like the Karma ... are you sure you tested the Kronos well enough before buying it, because it seems the Kronos is not the right thing for you (nothing personally against you).

padking · Post by **padking** » Tue Jul 19, 2011 7:03 pm

I had my Kronos 61 for 5 days now and the
screen is really a pain, yesterday I worked on
correcting some combis (not to good by the way) and after 30 minutes tha, I had to
stop,my eyes where tired, I hope the editor
will help me with that problem.

Maybe my screen is not working good when
I touch it you can ear the beep but nothing
happens you have to do it again ????

I did calibrate the screen as suggested and the
brilliance is at max so what the......?

Padking

mm-pro · Post by **mm-pro** » Tue Jul 19, 2011 7:33 pm

So secret, I don't know about it...where?

Regards,

MM

Rocness wrote:The Oasys has a secret VGA out put on the back to display to a larger
screen , don't know if Kronos has this or not .

curvebender · Post by **curvebender** » Tue Jul 19, 2011 7:50 pm

mm-pro wrote:So secret, I don't know about it...where?.

http://www.karma-lab.com/forum/showthread.php?t=10131

michelkeijzers · Post by **michelkeijzers** » Tue Jul 19, 2011 7:54 pm

padking: a double post with 11 mins difference ??

padking · Post by **padking** » Tue Jul 19, 2011 8:01 pm

Sorry,

I assumed the first one did not went true
I did not have the usual confirmation for the first
message ??????

padking

michelkeijzers · Post by **michelkeijzers** » Tue Jul 19, 2011 8:07 pm

np at all (just was curious because I already reacted on the first).

Korg Forums

Kronos Touchscreen Review Resolution, size navigation???

How is factory reset done on Kronos?

Thanks