Still looking for nice ES2-company ...
Has anyone done this? ES2 sends out midi notes via usb - and the OP-1 can receive Midi notes via usb. Thus, it should be possible to sequence the later with the ES2, right?
ES2 + OP-1
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Re: ES2 + OP-1
no, both units need what is called a usb host device which neither one is.rotlaub wrote:Still looking for nice ES2-company ...
Has anyone done this? ES2 sends out midi notes via usb - and the OP-1 can receive Midi notes via usb. Thus, it should be possible to sequence the later with the ES2, right?
usb to midi usually requires one device to be a computer.
You either need this one:
http://www.thomann.de/de/kenton_midi_usb_host.htm
... or a similar DIY solution like Arduino, Raspberry Pi etc.
http://www.thomann.de/de/kenton_midi_usb_host.htm
... or a similar DIY solution like Arduino, Raspberry Pi etc.
Or an iOS device acting as a MIDI Host using either MIDI Bridge, Midiflow, or some other app that does the same thing. I have done this with my e2 and OP-1 and it works fine. I would run the audio back into the e2.Tom 62 wrote:You either need this one:
http://www.thomann.de/de/kenton_midi_usb_host.htm
... or a similar DIY solution like Arduino, Raspberry Pi etc.
<b>Korg Gear:</b> Electribe 2, microSAMPLER, Mini Kaoss Pad 2, monotron, nanoKey, nanoKontrol2, nanoPad2
<b>Korg Apps:</b> iMS-20, iElectribe, iKaossilator
<b>Old Korg Gear:</b> Electribe EMX-1SD, monotribe (with MIDI), Kaossilator Pro, KP3, SOS
<b>Korg Apps:</b> iMS-20, iElectribe, iKaossilator
<b>Old Korg Gear:</b> Electribe EMX-1SD, monotribe (with MIDI), Kaossilator Pro, KP3, SOS
yes, like thisrotlaub wrote:ES2 Midi out -> Kenton Midi in
Kenton Midi Out via USB -> OP1 USB
Like this ?
http://www.kentonuk.com/products/items/ ... host.shtml