Hello,
I just bought an Electribe ESX and I'm trying to synchronize it with my korg SQ 1, which controls a korg MS 20 mini. I tried to connect from the electribe midi out to the SQ 1 SYNC-IN, I set the clock global setting of the electribe to Int, to be the master, but when I press play on the electribe the SQ 1 doesn't start. I tried the same thing with the SQ 1 as the master but It doesn't work again. Am I doing something wrong? Any help will be appreciated. Thank You!
Giulio
Korg electribe esx sd into korg sq 1 via midi sync
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
You are plugging into the analogue sync jack on the SQ1, this is not midi. The SQ1 cannot be synced to the Esx via midi directly.
The positive is you have a workaround because the ESX has extra outputs. You can use one of these outputs to sync the SQ1.
You will need to sequence a clock signal on 16ths and send it out to the SQ1. A rimshot should work for this. I do not have either kf these units so i cant test it, but in theory it should work. Many other analogue equipment is synched in thjs way.
You may have to check the manual of the SQ1 to adjust some sync polarity settings if you cant get it to work. Maybe others who have done this can chime in?
The positive is you have a workaround because the ESX has extra outputs. You can use one of these outputs to sync the SQ1.
You will need to sequence a clock signal on 16ths and send it out to the SQ1. A rimshot should work for this. I do not have either kf these units so i cant test it, but in theory it should work. Many other analogue equipment is synched in thjs way.
You may have to check the manual of the SQ1 to adjust some sync polarity settings if you cant get it to work. Maybe others who have done this can chime in?
Ok! you were right about the sync-in. I just used the midi out of the SQ 1 to the midi in of the elecrtibe (so without using the sync out). In this way they are in sync. I don't know if the sync-in accept midi because by using that I couldn't make it start even by pressing the SQ 1 play button; it just didn't start. With the midi out of the SQ 1 it's working, but I only can be master with the SQ 1 I suggest(there is no midi in in the SQ 1)
