Smooth Sound Transition not working in one combi

[laandodeman]

I imported a combi from a friend and modified it. Only now I noticed the Smooth Sound Transition is not working for this particular combi, while all the others do work.

I turned Karma and all the FX off.

Any idea how to solve this?

[GregC]

I imported a combi from a friend and modified it. Only now I noticed the Smooth Sound Transition is not working for this particular combi, while all the others do work.

I turned Karma and all the FX off.

Any idea how to solve this?

more info

whats going on with voice stealing ?

[Canoehead]

I suggest you check your audio input settings for the combination and check the Use Global Settings box in the upper left corner.

I had a similar problem when I assigned one part of a combi to an individual out, sending the signal to an effects unit then back into one of the Kronos's inputs.

Hope this helps,
Gord

[laandodeman]

Tried the "use global settings' in the audio in. Didn't make a difference.

Voice stealing remains under 75%, FX (turned them on again) under 50%.

[GregC]

Tried the "use global settings' in the audio in. Didn't make a difference.

Voice stealing remains under 75%, FX (turned them on again) under 50%.

check your midi settings. For example , if every used program has sustain, that might effect SST

Stacking 7 AP's ( know someone that does this) or 1 of the resource heavy Sound Engines could affect SST.

another guess is a Program setting within the Combi. Most Programs use INT ( internal) . If you have unused Programs, you could set it to Off.

[Canoehead]

Also check that the combi you are transitionng to is using global audio settings.

[amit]

Have you checked the timbre priority, I had somewhere read that it affected sound engine in strange ways.

[laandodeman]

Tried the "use global settings' in the audio in. Didn't make a difference.

Voice stealing remains under 75%, FX (turned them on again) under 50%.

check your midi settings. For example , if every used program has sustain, that might effect SST

Stacking 7 AP's ( know someone that does this) or 1 of the resource heavy Sound Engines could affect SST.

another guess is a Program setting within the Combi. Most Programs use INT ( internal) . If you have unused Programs, you could set it to Off.

Where can you edit midi sustain settings GregC?

[laandodeman]

Thanks for all the suggestions and tips guys. But nothing seems to work.

Really strange.......

[GregC]

Tried the "use global settings' in the audio in. Didn't make a difference.

Voice stealing remains under 75%, FX (turned them on again) under 50%.

check your midi settings. For example , if every used program has sustain, that might effect SST

Stacking 7 AP's ( know someone that does this) or 1 of the resource heavy Sound Engines could affect SST.

another guess is a Program setting within the Combi. Most Programs use INT ( internal) . If you have unused Programs, you could set it to Off.

Where can you edit midi sustain settings GregC?

you should see 3 midi tabs in your combis.

1 of the tabs has sustain- check boxes per program

[laandodeman]

Solved it. First I was trying to change everything with the first of the two combi's. I thought that one was the bad guy, since the second combi had much less going on in terms of number of parts and FX than the first. I entirely recreated the second combi and now it works.

But strange it remains.