Electribe Sampler2 SD Card issues: can't save user soundbank

Discussion relating to the Korg Electribe products.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
LucilloStardust
Posts: 1
Joined: Mon Dec 26, 2016 11:37 am

Electribe Sampler2 SD Card issues: can't save user soundbank

Post by LucilloStardust »

Hi guys, I'm literally down for this... I can't really explain how, but my Electribe Sampler 2 seems that can't save imported samples. When I switch off the machine it lost all the imported samples saved in the User Soundbank (from 500 to 999). So, initially the Electribe recognizes the SD (a Kingston 4gb sdhc class4) with the samples, I'm able to import them in the soundbank, but then when I switch off/on the machine It's like anything was saved in the allocated user memory.
I tryed another sd card and I did a factory reset but nothing has changed...
Seems a serious software problem..
Please help me! Thank you...
Z7A
Junior Member
Posts: 52
Joined: Fri Sep 25, 2015 9:02 am

Post by Z7A »

Hi, you have to press Meny/Enter, go to DATA UTILITY, and then EXPORT ALL SAMPLE. It will create a file called e2sSample.all which is loaded upon startup.

If you don't want to use the factory samples anymore (they take up lots of space/time) you may want to download an empty e2sSample.all file and put on your SD card before you start sampling. And check out the softwares available for editing your sample libraries.
Post Reply

Return to “Korg Electribe”