I'm so used to using expression pedal with any keyboard. The pedal I was using stopped working, so I went ahead and bought a new one, korg XVP-20 - VOL/EXP PEDAL. Expensive- $160. I had high hopes on this one, but completely dis-satisfied. The sound breaks in between any where below the peak volume level. I used to put the blame on the PA system until I realised it was my new Expression pedal. (I had this issue even with the old expression pedal also, but never this bad). I did the calibration all very well, by the book.
I can't live without an expression pedal.
Anyone, PLEASE HELP!
Using Expression pedal with PA3X
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Using Expression pedal with PA3X
Joezach
Korg Pa2x, Pa3x., Ketron EVENT
Korg Pa2x, Pa3x., Ketron EVENT
-
karmathanever
- Platinum Member
- Posts: 10492
- Joined: Mon Jan 12, 2004 5:07 am
I have successfully used Yamaha FC7 and the expression pedals on Behringer FCB1010
I also have Roland EV-5 but it's rubbish
Never tried the Korg pedal
Pete
I also have Roland EV-5 but it's rubbish
Never tried the Korg pedal
Pete
PA4X-76, Karma, WaveDrum GE, Fantom 8 EX
------------------------------------------------------------------
## Please stay safe ##
...and play lots of music
------------------------------------------------------------------
------------------------------------------------------------------
## Please stay safe ##
...and play lots of music
------------------------------------------------------------------
-
Ritchie_Blackmore
- Junior Member
- Posts: 74
- Joined: Fri Dec 11, 2009 4:09 pm
- Location: Bulgaria
I have an EXP-2, no problems 7 years since Ive bought it! It works perfectly! Regards Nick 
"Music is a sublime revelation of all wisdom and philosophy." Ludwig Van Beethoven
KORG PA2x Pro, KORG DS-1H, KORG EC-5, KORG EXP-2, BEHRINGER EUROPOWER PMP 500, BEHRINGER EUROLIVE VS1220, YAMAHA PACIFICA 112J, BOSS GT 10, SHURE PG58
KORG PA2x Pro, KORG DS-1H, KORG EC-5, KORG EXP-2, BEHRINGER EUROPOWER PMP 500, BEHRINGER EUROLIVE VS1220, YAMAHA PACIFICA 112J, BOSS GT 10, SHURE PG58
-
MadrasGiaguari
- Full Member
- Posts: 200
- Joined: Sun Aug 28, 2005 3:28 pm
- Location: Italy
I use EXP2 by Korg, and works perfectly.
The very nice thing is that you can assign the expression pedal to individual parts: off to a piano or guitar, on to the strings pad or organs. Fantastic option.
Another nice thing is to control a midi device with expression. In my case, I use an Hammond XMC2 module that makes organ sounds and Leslie much better than Pa3x, and the expression is a must for an Hammond organ.
The very nice thing is that you can assign the expression pedal to individual parts: off to a piano or guitar, on to the strings pad or organs. Fantastic option.
Another nice thing is to control a midi device with expression. In my case, I use an Hammond XMC2 module that makes organ sounds and Leslie much better than Pa3x, and the expression is a must for an Hammond organ.