New Pa700 Operating System Update
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
NativeAngels
- Platinum Member
- Posts: 887
- Joined: Thu Mar 22, 2012 9:24 pm
usb not recognised
I am trying to update my pa700, i have the new package on the usb which is formatted fat32, the korg pa 700 says loading usb, but then after that is says korg drive and there is no usb drive available, how do i make it visible? 
Firstly run the backup routine to do the obvious with the standard op system.
With the zip file contents unzipped to the usb drive the first thing to do is read the enclosed information on installing the update as you have to power off the Korg, insert the usb drive and press and hold a button whilst then powering up the keyboard, it will then start the install.
I am deliberately not telling you which button needs to be pressed and held so that you will have to read the install file.
Edit
Btw it is just that if I did post specifics and someone screwed up, I would take the can, hence I just point and suggest
With the zip file contents unzipped to the usb drive the first thing to do is read the enclosed information on installing the update as you have to power off the Korg, insert the usb drive and press and hold a button whilst then powering up the keyboard, it will then start the install.
I am deliberately not telling you which button needs to be pressed and held so that you will have to read the install file.
Edit
Btw it is just that if I did post specifics and someone screwed up, I would take the can, hence I just point and suggest
Last edited by Biggles on Sun Dec 24, 2017 4:46 pm, edited 1 time in total.
Biggles
Lancashire, UK
Lancashire, UK
