Kronos using Ipad/Apps and midi controller

[siwaj11]

Hello Everyone

Just wanted to Connect my Ipad (using apps like Sample Tank, Korg M1 ect) and midi keyboard controller (K 49 Series) into my Korg kronos.

I am aware that I can hook up my Ipad directly to my midi keyboard controller. that I already did and it was working perfectly.

I hooked up my ipad via usb to my kronos and hooked up my midi keyboard controller via midi cable. everything is perfectly working.

Remote Kronos, Korg M1, Smple Tank, Korg Module apps from my Ipad is working on my kronos.

Midi keyboard controller is also working.

Assigning dedicated midi channel from my kronos and match the midi channel of my midi controller is perfectly working.

since I have 1 Ipad and I don't want to connect/disconnect every time I wanted to play the Ipad app (sample tank or korg M1 app ect) using my midi controller.

My question is how to make my midi controller control my ipad ( ipad apps) while both are connected to the Kronos via midi cable/usb works?

As I tried assigning 1 track from Combi mode in Timber Paramater tab assign as EXT and Midi Channel is assigned in ch 2.

I have assigned my K 49 Seris Midi Keyboard controller in mid ch 2
unfortunately it's not working.

did I mis some configuration? or my goal is not possible.


thank you in advance.



Gear: Korg Kronos, Korg K 49 Series, Korg Nanopad, KRK Rokit 8, MacPro, LogicPro, Reason 4, Sennheiser Microphone, Shure SLX, Behringer X32

[geoelectro]

I believe you are trying to send MIDI into the Kronos and have that data exit the Kronos on a USB port to your iPad, correct?

If so, Kronos will not do that. Any MIDI in (MIDI port or USB) will not be present on any MIDI or USB port. (other than MIDI Thru from MIDI in)

This function is MIDI Merging and not available in the K.

Geo

[ronnfigg]

Hello Everyone

Just wanted to Connect my Ipad (using apps like Sample Tank, Korg M1 ect) and midi keyboard controller (K 49 Series) into my Korg kronos.

I am aware that I can hook up my Ipad directly to my midi keyboard controller. that I already did and it was working perfectly.

I hooked up my ipad via usb to my kronos and hooked up my midi keyboard controller via midi cable. everything is perfectly working.

Remote Kronos, Korg M1, Smple Tank, Korg Module apps from my Ipad is working on my kronos.

Midi keyboard controller is also working.

Assigning dedicated midi channel from my kronos and match the midi channel of my midi controller is perfectly working.

since I have 1 Ipad and I don't want to connect/disconnect every time I wanted to play the Ipad app (sample tank or korg M1 app ect) using my midi controller.

My question is how to make my midi controller control my ipad ( ipad apps) while both are connected to the Kronos via midi cable/usb works?

As I tried assigning 1 track from Combi mode in Timber Paramater tab assign as EXT and Midi Channel is assigned in ch 2.

This is a transmit function. Your EXT has to be a sound module or some other tone producing source.

I have assigned my K 49 Seris Midi Keyboard controller in mid ch 2
unfortunately it's not working.

did I mis some configuration? or my goal is not possible.


thank you in advance.



Gear: Korg Kronos, Korg K 49 Series, Korg Nanopad, KRK Rokit 8, MacPro, LogicPro, Reason 4, Sennheiser Microphone, Shure SLX, Behringer X32