Sync setting Volca FM

Discussion relating to the Korg Volca Series.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
janmelin
Posts: 2
Joined: Tue Sep 24, 2019 6:45 pm

Sync setting Volca FM

Post by janmelin »

I will change SyncStp 2 to SyncStp 1 in my Volca FM.
For saving this after changing from 2 to 1 the manual says press REC.
The unit restarts but SyncStep is not changed to 1.
Any solution?
OpAmp
Platinum Member
Posts: 1180
Joined: Fri Jun 07, 2013 10:26 pm
Location: Brussels, BE

Post by OpAmp »

Hi,

Do you mean that if you reboot the unit while FUNC pressed, that led8 is lit?

Bye
microKORGXL, Kaossilator Pro, monotribe, SQ-1, volca fm, Kross 88 BK
Alesis SR18, Akai Miniak, Fender Strat, Line 6 Spider II 112, Zoom MS-50G
janmelin
Posts: 2
Joined: Tue Sep 24, 2019 6:45 pm

Post by janmelin »

Your remark about led8 helped me solve the problem.
When I change SyncStp 2 to 1 and than save by pushing REC there is no change stored.
But when I have SyncStp 2 selected and then pushing REC it will change to SyncStp 1 as I wanted.
A little bit confusing for me but the problem is solved.
Thank you very much!
Post Reply

Return to “KORG Volca Series”