Home made RG Kaoss Guitar!

[Future_Difficulty]

I've always been intrigued by the RGKP6 Electric Guitar. An Ibanez electric guitar and a Kaoss Pad, yes please! I found the official one to be a bit lacking though. It's expensive, only has a mini kaoss pad, and the touch screen is not quite where I would want it while playing the guitar.

So I had an old Kaoss pad 2 with a broken touch screen lying around, why not combine it with an electric guitar?

I then found a cheap(10$) electric guitar at a thrift shop that I didn't mind cutting up for this project.

I then ordered a new touch screen for the Kaoss pad 2. I got one that has a connector for the ribbon cable that transfers to 4 wires. I got that so that I could solder the wires to the points on the Kaoss Pads circuit board. While the Kaoss pad circuit boards were out of the body I drilled three holes through the case for wood screws to hold it onto the guitars body. I then cut the bottom corner of the electric guitars body off to make a flat mounting spot for the Kaoss Pad. I then attached the Kaoss pad case to the guitar body and put the circuit boards back in.

And voila! Home made Kaoss Guitar.

[AdamBurgess1337]

Hey guys. Need your advice on where to get a custom guitar. Apologies for bumping the thread.

[YvonneClark]

No worries about bumping the thread. We're here to help! If you're on the lookout for a custom guitar, there are a few cool places you can check out. Some popular options include HaloGuitars, Fender Custom Shop, and Jackson Custom Shop. I'm new here, but I heard these places have some awesome choices. Also, if you're into Irish music, you might want to find a guitar that fits that style. Just my 2 cents.