Change velocity on K61

[pehein]

Hi all

I have a K61 (not the P version) and am wondering how to change the velocity? (The K series software does not work on macOS Catalina.)

If some now knows a way to do this on the keyboard itself, or with Garageband, or with any other means - please let me know!

Thanks much
Peter

[voip]

It can be done from the keyboard itself, when it is powered up. The K-series controllers have 3 velocity curves plus a constant (127) velocity setting. To select the velocity curve, hold down [BANK] button until the K-Series enters the Setting mode, then press the Program 1 [PIANO 1/E.P. 1/ORGAN 1] button (the button will flash). Now press the piano keys, as follows: C4 for (soft), C#4 (standard), D4 (hard), D#4 (const). The relevant keys are the ones nearest the middle of the keyboard.
.

[pehein]

Thanks voip

That'd work on the K61P - I only have the K61, and there's no BANK key. The manual describes the procedure for the K61P, but I cannot see how this works for the K61.

The K61 was actually in a state with constant velocity, and I did a hard reset where it now has dynamic velocity. So it can manage both (with and without dynamic). I just have no clue on how to change with without the (now defunct) Korg Mac software...

Peter

[voip]

The original user manual for the K61 (not P) seems rather elusive.

Using the Windows K-series Editor, and Korg MIDI drivers, might be an approach, if it is possible to access a suitable PC.

.