Only mono output

gojigod · Post by **gojigod** » Sat May 02, 2020 2:06 am

Hello

If I connect two 1/4" cables to the output jacks I only get signal from the l/mono jack, and same deal with two xlrs. Is there a setting to fix this? Any guidance?

voip · Post by **voip** » Sat May 02, 2020 10:45 am

Can stereo be heard through headphones?

.

gojigod · Post by **gojigod** » Sat May 02, 2020 9:03 pm

voip wrote:Can stereo be heard through headphones?

.

good question, it is mono through the headphone jack also.

I was able to get stereo output by plugging the L/Mono cord all the way in and plugging a cable in to the right output but just a hair pulled out. A hack just for the moment. Any ideas?

voip · Post by **voip** » Sun May 03, 2020 12:58 pm

Could be dirty jack contacts. A clean with Deoxit, or Servisol Super 10, is always a good idea. Sprayed onto the jack plug then the plug inserted in to the socket, wiggled a bit, removed, wiped dry and repeated, until the wipe becomes clean.
.