how to copy songs from korg 01wfd to korg krome

Discussion relating to the Korg Krome Workstation.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
solton1@o2.pl
Posts: 7
Joined: Fri Mar 12, 2021 4:43 pm

how to copy songs from korg 01wfd to korg krome

Post by solton1@o2.pl »

Hello everyone
I am asking for help. I have korg krome and korg 01wfd.
I would like to rip songs to a sequencer in korg krome and save to play it in krome. My question is how to do it because on PC it does not read korga format and does not see songs, and whether songs from korg 01wfd will read korg krome. how can I describe step by step how to do it
Thank you in advance and best regards to everyone
Zbyszek :beer :beer :beer :beer :beer
voip
Platinum Member
Posts: 4013
Joined: Thu Nov 27, 2014 2:07 pm

Post by voip »

It might be possible by using a MIDI DIN cable between the 01/W MIDI out and the Krome MIDI in. It will be necessary to match in the Krome, as much as possible, the Programs in the Combi that was used for the song in the 01/W. Check that the MIDI channels are the same for each Program on both keyboards. When this is done, set the Song to play on the 01/W whilst at the same time setting the Song record up on the Krome.

The end result may not sound identical, because of differences in the Combi sounds.

The above description is for a basic method. It may well need tweaking to get it to work.

.
solton1@o2.pl
Posts: 7
Joined: Fri Mar 12, 2021 4:43 pm

Post by solton1@o2.pl »

ok i will try. possibly I will put the instruments as if something didn't sound Thank you very much for your help
voip
Platinum Member
Posts: 4013
Joined: Thu Nov 27, 2014 2:07 pm

Post by voip »

Looking at the 01/W user manual, sequencer section, it will also be necessary to assign the EXT status for each track, probably to "BOTH", so the data are output on the MIDI out port.

.
solton1@o2.pl
Posts: 7
Joined: Fri Mar 12, 2021 4:43 pm

Post by solton1@o2.pl »

voip wrote:Looking at the 01/W user manual, sequencer section, it will also be necessary to assign the EXT status for each track, probably to "BOTH", so the data are output on the MIDI out port.

.
ok thank you very much for your help I will try to do so thank you and best regards
Post Reply

Return to “Korg Krome”