My Monotron outputs to headphones, but not to mixer (even a battery powered) or amplifier or DAW. In both cases (headphones and output) I am using a mini stereo plug, but I have also tried mono. It is weird !
Sound outputs fine through the headphones, but not it a patch cable is used to connect to mixer, speaker, whatever.
I do have some mods on the inside, and when I opened it to look, the wire to the cutoff point had come loose... I resoldered it. Before I desolder all four mod wires, does anyone have experience with this problem?
Monotron output question
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
- Posts: 6
- Joined: Tue Nov 15, 2016 3:51 am
- Contact:
-
- Posts: 6
- Joined: Tue Nov 15, 2016 3:51 am
- Contact:
I have somewhat found a way, thanks to a 2010 post on another forum
http://archive.monome.org/community/dis ... ot/p1.html
Splitting the output from Monotron and using the RIGHT only produces sound via mixer, etc. Still weird, but. . .
j
http://archive.monome.org/community/dis ... ot/p1.html
Splitting the output from Monotron and using the RIGHT only produces sound via mixer, etc. Still weird, but. . .
j