Nautilus & EK50
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
mikeonkeys
- Posts: 1
- Joined: Fri Feb 10, 2023 5:52 pm
Nautilus & EK50
Can I connect my Korg Nautilus to my Korg EK 50 & use its inbuilt speaker system?
Yes. A couple of different ways of doing this.
1- Use an audio cable with 3.5mm (1/8") stereo jack on one end to two 1/4" TS jacks. The 3.5mm jack goes to the EK50's Audio Input, and the 1/4" jacks into the Nautilus' R and L/Mono outs.
2 - Use a stereo audio cable with 3.5mm (1/8") jacks on each end, and a 1/4" male to 1/8" stereo female adapter. Plug the adapter into the Nautilus' Phones output, and connect the stereo cable between this adapter, and the EK50's Audio Input jack.
Should it be necessary, adjust the EK50's Audio In sensitivity, using the Audio In Level parameter on the Settings pages.
.
1- Use an audio cable with 3.5mm (1/8") stereo jack on one end to two 1/4" TS jacks. The 3.5mm jack goes to the EK50's Audio Input, and the 1/4" jacks into the Nautilus' R and L/Mono outs.
2 - Use a stereo audio cable with 3.5mm (1/8") jacks on each end, and a 1/4" male to 1/8" stereo female adapter. Plug the adapter into the Nautilus' Phones output, and connect the stereo cable between this adapter, and the EK50's Audio Input jack.
Should it be necessary, adjust the EK50's Audio In sensitivity, using the Audio In Level parameter on the Settings pages.
.