Page 1 of 1

Korg M1: just changed battery, how to reset factory sounds?

Posted: Sat Feb 03, 2024 6:09 pm
by jeuxdorgues
Hi,

I just changed the CR2032 battery on my Korg M1, now all sounds are "Init sounds".

Where can I download the factory soundbank ?

How to upload them to the M1 ? In which specific menu should I go on the M1 to enable receiving SYSEX data ?

Thanks

Posted: Sat Feb 03, 2024 7:39 pm
by voip
Restoring the sounds is mentioned briefly in the M1 battery replacement guide:

https://www.korg.com/us/support/downloa ... /139/2139/

There are further discussions on this forum:

http://www.korgforums.com/forum/phpBB2/ ... p?t=129226

http://www.korgforums.com/forum/phpBB2/ ... hp?t=84905

http://www.korgforums.com/forum/phpBB2/ ... hp?t=77688

Not all USB to MIDI interfaces work correctly. The cheap ones on eBay are best avoided. I found the Korg Kontro49 to be a reliable one. Connect its MIDI Out to the M1's MIDI In. It may be necessary to enable SysEx receive on the M1, and of course disable memory protection.

.

Re: Korg M1: just changed battery, how to reset factory soun

Posted: Sat Feb 03, 2024 8:56 pm
by T3owner
M1 banks, including the factory preload:
http://www.korgforums.com/support/m1.htm

jeuxdorgues wrote:Hi, Where can I download the factory soundbank ?