Need Midi help, behringer FCB1010

alanG · Post by **alanG** » Wed Nov 07, 2007 8:49 pm

Hi all I'm new to Midi, and need help with a walk through if possible, on how to get my 1010 to be used as a Volume/expression Pedal on iether A or B pedals for the Korg PA1X. Thanks for any help.
alanG

admar · Post by **admar** » Wed Nov 07, 2007 9:06 pm

Hi Alan,

I'm not familiar with the Behringer FCB1010, but there is a Yahoo group that is dedicated to it at: http://tech.groups.yahoo.com/group/fcb1010/

Or if you can read German, do a search for Behringer at the site: http://www.pa1xpro.com/korg_forum/viewforum.php?f=2 and you'll find many useful information.

Goodluck, Admar

karmathanever · Post by **karmathanever** » Thu Nov 08, 2007 1:22 am

Hi Alan

Do you have the PC software for this pedal - it's free and excellent - so much better than programming on the pedal.

I am at work now but can send you the details later if you do not have them...

Cheers

Pete

alanG · Post by **alanG** » Thu Nov 08, 2007 11:45 am

Thanks Admar, I have got the Yahoo site, but still finding it difficult, I usually end up seing my 'Two Pet Hates' 1. Yes it can be done, not much help. Or 2. 30 pages of gobildegook that I can't understand. Thanks also to Pete, I will have to buy compatible cables 'Small Midi Male to Large Midi Female out' to conect 1010 to Computer. May get them this afternoon if shop has them in stock. PS opened 1010 and Version 2.4 chip installed.
Thanks Guy's
alanG

karmathanever · Post by **karmathanever** » Thu Nov 08, 2007 1:33 pm

Hi again

Software is here - it is excellent:-
http://www.mtnsys.com/faq-fcb/Web%20Install/Default.htm

Cheers

Pete