help restoring factory presests

[machmike]

I lost everything on my board when it was reset. None of my songs will play with the correct patches.

I need C and D combinations restored.

Thanks
Mike

[suddenjoy]

Machmike,

Since noone seems able or willing to respond, let me try. I used a Trinity once in 1997, now only own a Microkorg, so forgive my rusty info.

However, I remember fixing lots of problems simply by loading the demo songs on the floppies (Ready for Radio, etc). Try that and see if it works. If not, then PM one of these intelligent tech guys.
[/quote]

[EddyDeegan]

To reset the Trinity, switch it on while holding down ENTER and 0

http://eddy.deegan.org/faq.html#3.1

This should do the trick

Eddy Deegan
http://eddy.deegan.org
http://www.myspace.com/moltendust

[Timo]

Just uploaded ALL of the factory presets for you.

http://www.infekted.org/Korg/KorgTrinit ... resets.zip (1.26MB zip file)

Also includes factory presets for Trinitys with Moss or Solo, too.

*Edted to include new URL location for download.

[KaRPiN]

NEVERRRRRRRRRRRRRRRRRRRRRRRRRRRRR, I have just f***ed the Trinitry doind this.

To reset the Trinity, switch it on while holding down ENTER and 0

I did it and it has only 1 sound in all the banks and combis IntlProgramA001,
IntlProgramA002, IntlProgramA003 ..........

A f*ck*ng mess, the keyboard to the rubbish bin [/i][/u]

[synthjoe]

To reset the Trinity, switch it on while holding down ENTER and 0

I did it and it has only 1 sound in all the banks and combis

This key combination initialises everything to its factory default - very useful after a firmware upgrade or other problems, when the synth might freeze, or other weird behaviour.

The factory sounds can be restored from the disks as posted by Timo.

[Kromeler]

Just uploaded ALL of the factory presets for you.

http://www.snapdrive.net/qs/e7729aabdb91 (1.88MB zip file)

Also includes factory presets for Trinitys with Moss or Solo, too.

The link does not work due to the passage of time. Someone could give me a new link where download this factory presets?
Thanks!

[synthjoe]

This link still works - I don't know how much longer as Korg UK page is now redirected to the international site. However, the file is still there - get it while you can.

[Kromeler]

Many thanks Synthjoe!

[Kromeler]

Where I can find the TR-Rack factory Combis & Programs to load on my Trinity V3? TR-Rack version had a lot of motion synth presets I would like to my Trinity V3, if possible somehow...

Thanks again!

[Timo]

TR-Rack has an extra 8mb of hardware waveforms that the standard Trinity doesn't have (unless it has the 8mb PBS-TRI expansion option installed). Consequently the programs/combis differ.

On a separate note, I've edited my former link to one that works:

http://www.infekted.org/Korg/KorgTrinit ... resets.zip

They include the factory PCGs for Trinitys with Moss (or Solo) expansion boards - the Moss ones are applicable to you (as you have a Trinity V3).

Here's a further link to my own Moss PCG too:

http://www.infekted.org/Korg/TimoMoss.pcg

[Kromeler]

TR-Rack has an extra 8mb of hardware waveforms that the standard Trinity doesn't have (unless it has the 8mb PBS-TRI expansion option installed). Consequently the programs/combis differ.

On a separate note, I've edited my former link to one that works:

http://www.infekted.org/korg/KorgTrinit ... resets.zip

They include the factory PCGs for Trinitys with Moss (or Solo) expansion boards - the Moss ones are applicable to you (as you have a Trinity V3).

Here's a further link to my own Moss PCG too:

http://www.infekted.org/korg/TimoMoss.pcg

Thanks for the info & your Moss PCG file!

[The Magic Hoof]

We need a new link

[Timo]

Should work again now. Seems my server is fussy about case-sensitivity in URLs.

[The Magic Hoof]

Thanks