Hi There,

Asena · Post by **Asena** » Tue Jan 18, 2011 1:49 pm

After i was in a Test Mode Whit my friend ROB for long time ago, I got something strange here,
Pa2x Gitar sounds and some others are to much modulation, now,
Is there any one who can help me to solve this issue please,

I dont think it,s damaged, or so, It,s only the configuration, But how can i fix this, Any help, Please.

Nor · Post by **Nor** » Tue Jan 18, 2011 2:10 pm

re-check the joystick cables inside your pa2x and their connections. or re-do a reset.

Asena · Post by **Asena** » Tue Jan 18, 2011 8:44 pm

I heave done that, My Sounds are ok, Most of them Just some of them is Strange whit MODULATION,
I must fix this HEEEEEELP!!!

Post by **karmathanever** » Wed Jan 19, 2011 4:03 pm

Hi Asena
Disclaimer: Do the following at your own risk
Check that you have not changed aftertouch calibration - this can produce some very strange results (similar to what you are describing) particularly if the A/T calibration has been set to very sensitive.

To do that, you need to be in diagnostics mode which I strongly DO NOT recommend to anyone, so please be careful.

Pete

Asena · Post by **Asena** » Thu Jan 20, 2011 7:04 am

Help me KARMA, I,m Familiar whit Computers and Sorf/Hardware, I must fix This. C ya And THANX

LESSISMORE · Post by **LESSISMORE** » Sat Jan 22, 2011 12:49 pm

Hi Asena

please try to desable the joystick (X/Y) in the Mixing-Consol.
When this solve the problem, you have to replace the joystick.

Asena · Post by **Asena** » Sun Jan 23, 2011 9:02 am

HELLO , Is this not a problem whit the internal SSD, And Coused from TEST mode?Couse evrythings worx otherwaise, What do you mean, Please explain better bro. this mis realy anoying, I did a system reset, But after i load the Fabric sounds, Is there again, I dont now how to get hands on this. Any help?
Thanx

LESSISMORE · Post by **LESSISMORE** » Sun Jan 23, 2011 1:11 pm

Please try to desable the joystick.
That is easy and fast.

When after this the modulation is gone, you
have to replace the joystick.

Did you this at this time ???

Asena · Post by **Asena** » Sun Jan 23, 2011 9:24 pm

Hi, No i did not But i, try now, Hope it helps

Asena · Post by **Asena** » Sun Jan 23, 2011 9:31 pm

Ok LESSISMORE How do i reset This, I Cant find!

LESSISMORE · Post by **LESSISMORE** » Sun Jan 23, 2011 9:56 pm

There is no reset-function like by using a midifile (shift+start/stop)
You only can mark and unmark the joystick-function, to see id that
solve the modulation-problem.
Is it solve after Unmarking, the joystick is destroyed.

Press SHIFT+ENSEMBLE
Select Kbd/Control

there you can mark und unmark the joystick x and y function.
Use the trck.sel. button to see all other tracks.

Unmark all x/y functions and try to here.
If you dont here the modulation-stuff,

you have to replace your joystick

It is the reason for the bad modulations.
You can try to move the joystick in all destinations for some minutes.
With a little bit luck, it will work again.