how to work kronos as a slave in protools

taurgo Production · Post by **taurgo Production** » Sat Jul 16, 2011 12:54 am

i need to know how to set the midi up right in Kronos so i can record all my tracks, part by part and the Kronos as the slave in pro tools 9 for mixing.

franzlp · Post by **franzlp** » Sat Jul 16, 2011 12:56 am

Did you read the manuals?

jg:: · Post by **jg::** » Sat Jul 16, 2011 1:49 am

Start with a blank Combi, in one of the empty Combi banks. They have 16 timbres ready to go on 16 different MIDI channels.

Or, start with a Combi that inspires you, copy it to an empty location, and add more MIDI channels to it as you build the track.

jg::

Lou · Post by **Lou** » Sat Jul 16, 2011 3:52 am

I think he was asking about midi routing the K into his DAW.

You really should read the manual, but to get started, Local Control "On" in Kronos Global and Patch thru "Off" in PT. If you will be working in the Internal Seq. and recording to PT,
then you will have to set each channel that you will be using in K to "Both" in the Timbre Parameters page. This is just a basic for you to get started.. You can do this also from Combi mode.

Have a look at the Wiki at KLF. This will get you up and going, but you have to read.. http://karma-lab.wikidot.com/search:sit ... 20to%20daw

taurgo Production · Post by **taurgo Production** » Mon Jul 18, 2011 11:53 pm

Thanks LOU!