pa1x noise problem

davidhaking · Post by **davidhaking** » Sat Oct 06, 2012 7:35 pm

hi. i am found problem on my pa1x , in all the styles in the sounds i hear a strange noise i try do format and i try to erase all the keyboard and still i have that problem of noise. give a picture for example .. the lab say that's a motherboard problem and i think he's dont tell me the true because he's want on that 1000$ fix it.... please if somone know how to fix the problem i be Grateful

video :

http://www.youtube.com/watch?v=ldbqKH4bpVM

------------------------pic----------------------------

http://imageshack.us/f/248/20120822135717.jpg/

charlie67 · Post by **charlie67** » Sun Oct 07, 2012 4:57 am

It sounds as though one or more of your styles is corrupted. I don’t have a Pa1x but I expect they are all much the same. It is probably not your operating system at fault, but your resources (styles, sounds etc.). Reload the fresh (download from korgpa) Pa1x factory resources and take it from there. If the problem persists, get a second opinion.

wittid · Post by **wittid** » Tue Oct 09, 2012 1:52 pm

Hi,

does you have a microphone plugged in.
For me it sounds like a feedback problem of micro.

Disconnect all the external cables, microphone and all other things (not the power cable) and test if you can re-produce the same noise if you use a headphone.

Let us know.

karmathanever · Post by **karmathanever** » Tue Oct 09, 2012 3:00 pm

Are you playing "sampled" sounds?
If samples are not configured correctly you can get similar strange results.

Pete

davidhaking · Post by **davidhaking** » Tue Oct 09, 2012 9:37 pm

i am not use a headphone and i tried all the outputs and still i have that distortion sound but now he is steady ! no come and go like before .. this is not the mic and i dont have samples my KB the sampler is empty now ! only original styles ... i try now to do update to OS 3.01 i hope this is fix my problem .. im tell you if this make good. tnx brothers

wittid · Post by **wittid** » Wed Oct 10, 2012 7:32 pm

maybe you should try to install everything new with formating the ssd ram.
i think pete you´ve a link to the manual how to do this.

save your backup and set before doing that, because everything will be erased and have to be re-loaded again.

hope that helps.

davidhaking · Post by **davidhaking** » Tue Oct 16, 2012 12:48 pm

i I did everything me and nothing worked, I tried to open the tool and try to find the problem and nothing helped .. Probably one of the chips is lost where I believe I will send it to the lab. Thanks anyway to everyone