The touch screen is on responsive and is cracked. It appears to glow with a character display beneath the cracked glass.
Finding a replacement touch screen is challenging and expensive. If the LCD is intact, is it possible to replace the digitizer layer with a new digitizer component, then reassembly touch screen assembly as a unit before reinstalling into the chassis?
Your thoughts...
cracked touch screen trinity proX
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
Spacecowboy
- Full Member
- Posts: 152
- Joined: Mon Nov 26, 2007 5:58 am
- Location: Atlanta, ga. USA
- Contact:
i just installed one oct 15th 2013
http://www.instrumentalparts.com/korg-t ... inity.html
nice and bright. also i was told by an electronics guy that the parts they use to make an adapter to fit trinity may be easily found as being standard pieces. i'm going to take the broken screen to them and one with the skinny ribbon and see if they can get me the parts.
nice and bright. also i was told by an electronics guy that the parts they use to make an adapter to fit trinity may be easily found as being standard pieces. i'm going to take the broken screen to them and one with the skinny ribbon and see if they can get me the parts.
Korg Trinity Pro 4 DW8000's Access virus KC Roland G8 2 Yamaha ex5's Korg poly 61 Soon to have a Prologue
Re: i just installed one oct 15th 2013
I just received my Digitizer touch screen layer. Cost $40.00Spacecowboy wrote:http://www.instrumentalparts.com/korg-t ... inity.html
nice and bright. also i was told by an electronics guy that the parts they use to make an adapter to fit trinity may be easily found as being standard pieces. i'm going to take the broken screen to them and one with the skinny ribbon and see if they can get me the parts.
I will disassemble my Prox and remove screen assembly... disassemble screen and replace with new digitizer and reassemble PRox with pictures.