Hey Guys,
I have a problem with my Volume slidder, If I go up to 50% on my slidder, I lose my Right Speaker.. Only the Left can be heared. So I need to be always under 50% to hear both L and R output on my Korg X50.
And when I move the slidder slowly, I can hear some little "scrounch" on my Outputs.
Maybe I Should open my keyboard to look inside if there is anything that is blocking the slidder, Is it reccommended to unscrew and open the Keyboard?
Volume Slidder broken =/
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
michelkeijzers
- Approved Merchant
- Posts: 9112
- Joined: Thu Feb 08, 2007 3:10 pm
- Location: Netherlands
- Contact:
Your warranty might be void if you open the case, but if you feel comfortable you might try.
I assume you changed the cable and speaker for left/right to be sure it's a problem of the synth and not the speaker and/or cable?
I assume you changed the cable and speaker for left/right to be sure it's a problem of the synth and not the speaker and/or cable?
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/