Connecting MicrokorgXL + Kaossilator + Kaoss Pad

[jb253]

Hey guys,

I'm curious of how to connect a set up for the following equipment.

Microkorg XL
Kaossilator Pro
Kaoss Pad
KRK monitors & Sub

Currently I have my output of my Microkorg-XL going straight into my kaossilator from stereo to AV, and the output of my kaossilator into my subwoofer from AV out to AV in. I'm thinking about adding a Kaoss pad to the mix, but I'm not sure how to add that connection since all 4 AV cable ports are being used in the kaossilator currently. Could I change the output from the AV cables to sub to the headphone jack on the kaossilator?

Any tips are appreciated, I'm new to this and am eager to start!

Thanks guys

-JB

[OpAmp]

Hi,

The Kaoss Pad is first of all a dynamic effect device. It needs input to give output (except if you use the samples).
So I would just chain it further: from kaossilator line out to kaoss pad line in. Then from kaoss pad line out to your monitors.
Or do I miss something?

Else a mixer is the answer...

Good luck.