| View previous topic :: View next topic |
| Author |
Message |
Loopboy
Joined: 14 Sep 2013
Posts: 1
Location: United States
|
 Posted: Sat Sep 14, 2013 8:18 pm Post subject: Help! Cannot transmit Microsampler samples to my computer! |
 |
|
Nothing happens when I try to import my samples from the microsampler to the editor. It just says "Transmitting 0%" then it says "Time out 0%" and just sits there frozen. All the correct drivers are downloaded, Microsampler editor software is installed. Global is on and protect is off. I dont know what else to do...   [/b] |
|
| Back to top |
|
 |
ericslide
Joined: 15 Mar 2015
Posts: 2
|
| Posted: Sun Mar 15, 2015 7:41 am Post subject: |
|
|
up!!
same problem here. |
|
| Back to top |
|
|
robotunes
Junior Member
Joined: 23 Jul 2009
Posts: 73
|
| Posted: Sun Mar 29, 2015 1:44 am Post subject: |
|
|
make sure microsampler's midi clock is set to internal
and use the same global channel on microsampler and the editor |
|
| Back to top |
|
|
dilake
Joined: 29 Dec 2013
Posts: 1
Location: Italia
|
| Posted: Fri May 29, 2015 11:53 am Post subject: RESOLVED |
|
|
Hi, i was affected by the same problem that made me crazy. I tried with several PC with different O.S. with no success.
Today when navigating inside the MS menu i found that the global parameter MIDI.ROUT was showing the msg "INVLD VALUE" or something similar (i don't remeber exactly).
I just set the parameter to USB+MIDI and now it's working.
Hope it will be helpful for you too.
greetings from Italy and sorry for my poor english
P |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
