Copy Voice - into Combi - question

[bobbybland]

That would be slick

[keekma]

Actually before I started PCG Tools I have thought about a way to combine multiple programs into one and more or less automatically combine the used IFXs, TFXs and MFXs but it is very hard (depending on how smart it would work).

One thing that I would really like is to automatically remove empty spaces between used IFXs so that a range of IFXs are empty to add another program (including IFXs).

This is possible with the function Clean up IFX Routings and Cut IFX. I discribed in my earlier post. See paramater guide page 161.

[bobbybland]

keekma, thanks for the tips.

[Dniss]

Hi, Sorry if this has been asked,but how is it that I can copy a voice with it's Ifx routing in tact, into a Combi?

Here's what I do:

From Combi mode, pull down menu, select copy program, find the program in the list, then I tick IFXs-All used, select the timber and press OK.

But choosing IFXs-All Used, the next time you copy a program, the program effects are placed in empty FX slots, not over writing the previous ones, and their routing should be appropriate.

Don't forget to select a different Timbre (like mentionned above) when you copy the next programs otherwise it will overwrite previous IFX.

See page 492 from the param guide.

[bobbybland]

Thanks Dniss

[michelkeijzers]

Actually before I started PCG Tools I have thought about a way to combine multiple programs into one and more or less automatically combine the used IFXs, TFXs and MFXs but it is very hard (depending on how smart it would work).

One thing that I would really like is to automatically remove empty spaces between used IFXs so that a range of IFXs are empty to add another program (including IFXs).

This is possible with the function Clean up IFX Routings and Cut IFX. I discribed in my earlier post. See paramater guide page 161.

Thanks ... I wasn't aware of this function.