Anyone know how to adjust pitchbend in comb mode?

Discussion relating to the Korg Krome Workstation.

Moderators: Sharp, X-Trade, Pepperpotty, karmathanever

Post Reply
morty
Full Member
Posts: 142
Joined: Sat Oct 13, 2007 11:23 pm

Anyone know how to adjust pitchbend in comb mode?

Post by morty »

For example the patch "Killer Guitar" Ive put the wah on an EXP pedal but want to adjust the joystick to less than a fifth... 2 or 3 semitones instead?
up and down.
I know how to do it on program mode but not comb mode.

any help would be appreciated.
thanks
mf_blues
Full Member
Posts: 191
Joined: Wed Nov 12, 2008 10:10 am
Location: Wolverhampton, UK

Post by mf_blues »

When I wanted to adjust the release for strings in a combi I had to edit the Program which I then saved in the user bank, I then changed the original in the combi for the new adjusted one.

I couldn't edit the release while in the combi, I could only adjust using the control knob which did not retain the settings even after writing the combi to memory.

Maybe the pitch bend is the same, if you can edit it in the program then do that and save the edited version then add that one to your combi.

Hope this helps.

Cheers
Mart
SanderXpander
Platinum Member
Posts: 7860
Joined: Fri Jul 29, 2011 7:23 am

Post by SanderXpander »

It the timbre parameter page where you can also set each timbre's transposition /tuning, you can set the bend range. Default is "program" (follows the program's setting as you'd expect) but you can set it to any range you like.

By the way I'm pretty sure you can also edit the release time from within a combi, using tone adjust. Just not with the real time control knobs (they're called real time for a reason; their position is not saved). I don't have a Krome though so I could be mistaken.
morty
Full Member
Posts: 142
Joined: Sat Oct 13, 2007 11:23 pm

Post by morty »

Thanks guys Ill give them both a shot.
morty
Full Member
Posts: 142
Joined: Sat Oct 13, 2007 11:23 pm

Post by morty »

SanderXpander you were right and it did work now Ive got the patch that I wanted to save.... now if I can only record this patch with the provided drum track and arp????????/
SanderXpander
Platinum Member
Posts: 7860
Joined: Fri Jul 29, 2011 7:23 am

Post by SanderXpander »

Record it where/how?
mf_blues
Full Member
Posts: 191
Joined: Wed Nov 12, 2008 10:10 am
Location: Wolverhampton, UK

Post by mf_blues »

SanderXpander

I did look at the tone adjust settings but couldn't get the release to change in there, I was probably doing something wrong though so I'll take another look and see what I can find.

Cheers
Mart
morty
Full Member
Posts: 142
Joined: Sat Oct 13, 2007 11:23 pm

Post by morty »

SanderXpander wrote:Record it where/how?

Never mind SanderXpander I found it by accident just push the record button
duuuhh


Do you know if i can store a song into the internal memory that will not get lost after shutoff without an SD card etc? I can do this on my other keyboards without a SD card.If so how do you do it? your batting a100%
so far with your advise
thanks again
steve
SanderXpander
Platinum Member
Posts: 7860
Joined: Fri Jul 29, 2011 7:23 am

Post by SanderXpander »

Sadly, you can't. Wish I could give you a differemt answer, but I can't risk ruining by batting average ;)

SD cards are cheap though and song files are tiny.
morty
Full Member
Posts: 142
Joined: Sat Oct 13, 2007 11:23 pm

Post by morty »

Still batting 100% in my book
thanks
mf_blues
Full Member
Posts: 191
Joined: Wed Nov 12, 2008 10:10 am
Location: Wolverhampton, UK

Post by mf_blues »

SanderXpander

I couldn't find any way of doing the release in the combi, so if anyone knows how please let me know.

Cheers
Mart
SanderXpander
Platinum Member
Posts: 7860
Joined: Fri Jul 29, 2011 7:23 am

Post by SanderXpander »

Ok sorry, I can in my Kronos and I thought the M3/M50/Krome would be able to too.
Post Reply

Return to “Korg Krome”