You can preload any saved Bank.KSC from a USB stick but only under Ram mode.
Save "sampling data mode" & "all" there , delete created _UserBank.KSC file , and set other KSC file in KSC-Autoload ,
but usb stick must be on board when booting else you have to manually load this KSC file.
System can read only connected SSD paths for streaming mode Ram preloaded samples.
AntonySharmman wrote:You can preload any saved Bank.KSC from a USB stick but only under Ram mode.
Save "sampling data mode" & "all" there , delete created _UserBank.KSC file , and set other KSC file in KSC-Autoload ,
but usb stick must be on board when booting else you have to manually load this KSC file.
System can read only connected SSD paths for streaming mode Ram preloaded samples.
Thanks to both.
AntonySharmman, yes I plan to leave the usb stick always connected, is so small you can't realize there is one plugged. The "problem" with your suggested approach is that if I have big samples (like I do actually with many of my sounds) I can't load them due to the small amount of ram.....streaming is the only way.
I really do not understand what's the meaning of reading samples from such a slow speed media as USB stick when
you have plenty of space in your SSD !
Even the smallest industrial SSD of 32 Gb of first Kronos can push your 3 Gb Ram to it's limits !
Kronos SSD should not be used as a storage place for SF2/Wav files , this is your USB stick/ext media job , try to preserve
there only loaded libraries and you'll never be out of space !
AntonySharmman wrote:I really do not understand what's the meaning of reading samples from such a slow speed media as USB stick when
you have plenty of space in your SSD !
Even the smallest industrial SSD of 32 Gb of first Kronos can push your 3 Gb Ram to it's limits !
Kronos SSD should not be used as a storage place for SF2/Wav files , this is your USB stick/ext media job , try to preserve
there only loaded libraries and you'll never be out of space !
Well, I understand what you are saying, the problem is that I have 4 bands and for each of them I have my set of sounds.
I use a lot the kronos is different studios for jingle, band collaborations ets....and I'm currently using the SSD also for storage.
Well , piece of cake , purchase an extra 120 Gb SSD for Sata2 port and you can easily have 10 full Kronos extra Sets
with their preload KSC files in KSC Auto_load menu !
This is exactly what I'm doing for various Gigs and studios !
Is exactly what I'll do...I actually opened another thread asking for compatibility with a sandisk SSD 480GB.
I have a buddy that works in sandisk and I can have that ssd for a lot cheaper than in a shop.