korg pa4x not enough memory for pcm samples

[mehranmusic]

Hello friends
Unfortunately, I got into this problem with the new operating system
not enough memory for pcm samples !!!
I can not load Sample
Capacity of samples should be high

[mehranmusic]

https://imge.to/i/ZflQT

https://imge.to/i/Zff7h

[Aripearlmusic]

You sir have way too many time sliced loops loaded. Try sampling what you need to recreate the loops into one or 2 drum kits and programming them. That's the right way to do it

[mehranmusic]

Why does Corg do not increase the number of Samples? The volume of the memory is increased, but the number of samples is low

The solution to this problem is not

[AntonySharmman]

You had posted at another topic concerning this issue but you hadn't red the following observations :

- If you load only drum/percussion loops in Pa4X using time sliced function (or externally edited) , then you can easily run out of 16.256 max samples positions
and preload buffer size of 300Mb rather than samples physical Ram space of 1500Mb.
For instance , a time sliced percussion wav of 4 bars will consume an average of 80 positions of samples , so 16000 slots /80 samples = 200
time sliced sounds maximum for Pa4X sampling interface ... a full waste of such a superior sampler with less than 200Mb samples size !
- 2000 samples of 1Mb size will consume 2Gb of samples Ram space , so the average 16000 samples positions is very decent for sound developing of
a Pro SET of 3GB compressed.
- Time sliced function is an auxiliary interface in a sampler and not meant to be used as primary source for all your samples resources !
IMO , arranger users must use midi events with real percussion / drum samples and not time sliced / naturally played drum samples.


Hope this helps

[mehranmusic]

Thank you so much for explaining this

[mehranmusic]

What is the solution to this problem?


You will resolve the next version of this problem