Korg Forums

Hi Salvador, The X50 Editor plugin does not produce any sound at all. It will control the X50 via USB (send midi notes, program changes, parameter changes, etc.), but the sound will only come out of the X50 itself, so you have to connect it to your audio interface if you want to record/process the ...

Hi tommy,

Thanks! I hope it qualifies for some free Korg gear!

Regards.

Hi theconnyb, Ok, now I understand what you are trying to do and what the problem is. And the problem is that you are trying to do something which is simply not possible. You will NEVER get separate audio channels for each individual Multi part! At least not "live" (I mean, in such a way that you ...

Hi Roentje12, Ok, understand (we are both in the same page). I think the problem is that the MicroX sends a couple of Sysex messages whenever you change Mode/Bank/Prog/Combi, and they are not allways in the same order, as far as I could see (using the MIDI-OX Windows tool). For instance, it seems to ...

Hi, I think that should be the problem! As far as I know (don't have my synth here to check), normally the prog/combi sound is sent to the *Main* outputs ONLY -- this should be the case for all preset progs/combis, I suppose. If you want to send the sound to the Individual outputs, you have to ...

Hi Roentje12, You have to: 1. Check (activate) "Chase Events - Sysex" in "File - Preferences - Midi"; 2. Uncheck the "Record - Sysex" in "File - Preferences - Midi - Midi Filter", so that Sysex messages are NOT filtered (they are recorded and played back too). Note: you don't need to uncheck the ...

Hi, You need one midi/instrument track to control the synth (record notes, parameter changes, etc.), and one audio track to record/process the synth sound (so you need to connect the synth's audio output to your audio interface input, and use this input in the audio track, and keep the audio track ...

Hi theconnyb, The X50 syntheziser does not send or receive any audio via USB. The USB connection is for MIDI only, and the X50 editor is only used to control the X50 synth (for example, you should be able to automate some X50 parameters using the X50 editor track in the DAW). The VST editor does not ...

Hi Charlieboy, In the MicroX it is showed briefly (very briefly!) during power up in the lower right corner of the display. I can read 1.0.5 in my unit. Probably the X50 will be similar. I think you need at least version 1.0.1 to have the favorites functionality, but why not updating to the last ...

Hi Vadim, Please take a closer look to the last post on this topic, because I suspect you will find the solution to your problem there. I had exactly the same problem with my MicroX and Windows 7: I correctly installed the drivers, but the midi port did not appear anywhere (eg Cubase, or MicroX ...

Hi, You need to send a maximum of 4 MIDI messages to change Combi/Prog. Here's how it works. Please note: all numbers are in Hexadecimal format! (use windows Calculator or http://www.binaryhexconverter.com/hex-to-decimal-converter if you need it in Decimal format). 1. Select Mode (System Exclusive ...

Hi all, As mentioned in another topic ( http://www.korgforums.com/forum/phpBB2/viewtopic.php?t=91956&start=0&postdays=0&postorder=asc&highlight= ), I've created a "pseudo librarian" tool for the X50 and MicroX synthesizers. It is able to do alot of librarian functions on .Xall files (only), like ...

Hi, So I've done my analysis and it seems there are some (but not a lot) of X50 programs that can be used in MicroX directly (using common waveforms). And also some MicroX programs that can be used in the X50. Here's the list of X50 programs that can be used in MicroX too (and are not in the MicroX ...

Hi michelkeijzers,

I've already started figuring out the Xall file format. I will send you what I have already.

Regards,
jcg.

Hi michelkeijzers, I did it with my MicroX and I get a 588 bytes file. I just select Combi mode, select the combi I want to export, and select save (X1comb file type). Are you using the editor connected to a real X50/MicroX? If you do not connect it the editor will never work properly (I tried that ...