Need Stand Suggestions
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Need Stand Suggestions
What do you guys recommend for a stand which would hold the following:
Oasys 88 with touch screen fully open
Jupiter 80 in the middle
Moog Voyager on top
Also, I dont want it to be an A-frame type.
Something which sets up easy and fast, what do you guys think?
Oasys 88 with touch screen fully open
Jupiter 80 in the middle
Moog Voyager on top
Also, I dont want it to be an A-frame type.
Something which sets up easy and fast, what do you guys think?
Korg Oasys 88: Fully Loaded
Korg Radias
Kurzweil PC3X
Jupiter 80
Moog Voyager Select Series: Solar Edition
Roland SH-5
Korg Radias
Kurzweil PC3X
Jupiter 80
Moog Voyager Select Series: Solar Edition
Roland SH-5
Check this thread which has several opinions
Really strong dual stand... have you used any of these?

Really strong dual stand... have you used any of these?
Current gear:
Access Virus TI2 Whiteout Keyboard (111/150), Access Virus TI2 Polar DarkStar Special Edition, Gibson Custom Lite 2013, Roland MV-8800


I ordered a 3 tier stand by Standtastic:
http://www.musiciansfriend.com/accessor ... 3000000000
The reviews were excellent and one of them caught my eye, guys has an Oasys 88 on bottom, Kurz PC2x in middle and an Andomedia on top, I think this will be perfect!
I'll post some photos once it arrives and I get it set up.
http://www.musiciansfriend.com/accessor ... 3000000000
The reviews were excellent and one of them caught my eye, guys has an Oasys 88 on bottom, Kurz PC2x in middle and an Andomedia on top, I think this will be perfect!
I'll post some photos once it arrives and I get it set up.
Korg Oasys 88: Fully Loaded
Korg Radias
Kurzweil PC3X
Jupiter 80
Moog Voyager Select Series: Solar Edition
Roland SH-5
Korg Radias
Kurzweil PC3X
Jupiter 80
Moog Voyager Select Series: Solar Edition
Roland SH-5
I just bought this one myself. I generally sit when I play. I bought it because it would bring all the keyboards as close together as possible. Took me about an hour yesterday to initially set it up but once you have the tiers where you want them, it's suppose to be rather quick for setup and tear down. Seams quite sturdy with no wobble.CrazyFoo wrote:I ordered a 3 tier stand by Standtastic:
http://www.musiciansfriend.com/accessor ... 3000000000
The reviews were excellent and one of them caught my eye, guys has an Oasys 88 on bottom, Kurz PC2x in middle and an Andomedia on top, I think this will be perfect!
I'll post some photos once it arrives and I get it set up.
Latest Set Up: Kronos 61, Casio Privia, Korg TR61, EoWave Ribbon, Roli Rise 48, TEC Breath Controller, StudioLogic MP-117 Bass Pedals, Moog Theremini.
Past Instruments of Construction: Hammond A100 w/Leslie 760, Korg R3, Roland AxSynth, Korg Poly61, Korg M1, Univox MaxiKorg, Korg MS2000, (2) Moog Concertmate MG1, (2) Hammond X5, Rhodes Mark I & 2, Farfisa Compact, Yamaha S08, Casio SK1, Strymon Mobius, Custom Bass Pedals, Burns B3 Theremin.
Past Instruments of Construction: Hammond A100 w/Leslie 760, Korg R3, Roland AxSynth, Korg Poly61, Korg M1, Univox MaxiKorg, Korg MS2000, (2) Moog Concertmate MG1, (2) Hammond X5, Rhodes Mark I & 2, Farfisa Compact, Yamaha S08, Casio SK1, Strymon Mobius, Custom Bass Pedals, Burns B3 Theremin.
Well if you look at that design if one screw comes loose the whole thing comes down. Not a sound design. Quite honestly if I were gigging with my OASYS 88 I would have it on a standalone stand because you often don't know if you'll get minor bounce off of stage risers or uneven surfaces of any sort. It's not worth risking the OASYS for that convenience. Put the other synths on another stand. If you are looking for a good stand for the OASYS I would recommend....
http://www.musiciansfriend.com/accessor ... 9000000000
http://www.musiciansfriend.com/accessor ... 9000000000
"The Oasys was made out of love...love lasts longer than fear"
This is the sturdiest stand out there.
I have a Motif XS8 and my Radias on it.
My Oasys is on a desk with my iMac.
This could also easily handle the Oasys and the Radias.
http://www.guitarcenter.com/Ultimate-Su ... 1442729.gc
I have a Motif XS8 and my Radias on it.
My Oasys is on a desk with my iMac.
This could also easily handle the Oasys and the Radias.
http://www.guitarcenter.com/Ultimate-Su ... 1442729.gc
Music is food for the soul.
iMac 24"-Logic9 Pro,Behringer X32,Roland VS2480CD,Korg Oasys88,Korg Radias, Yamaha Motif XS8, Roland Integra 7,Roland XP80,Roland VPro Session,Fender USA Strat, Gibson Les Paul USA Studio, Ovation Custom,Fender Jazzmaster Base,Roland GT6, Line6 PodXt Live. TC Helicon VoiceLive 2, Marshall JVM 410H 1960CABS. Fender Princeton Chorus.
iMac 24"-Logic9 Pro,Behringer X32,Roland VS2480CD,Korg Oasys88,Korg Radias, Yamaha Motif XS8, Roland Integra 7,Roland XP80,Roland VPro Session,Fender USA Strat, Gibson Les Paul USA Studio, Ovation Custom,Fender Jazzmaster Base,Roland GT6, Line6 PodXt Live. TC Helicon VoiceLive 2, Marshall JVM 410H 1960CABS. Fender Princeton Chorus.
This is the sturdiest stand out there.
I have a Motif XS8 and my Radias on it.
My Oasys is on a desk with my iMac.
This could also easily handle the Oasys and the Radias.
http://www.guitarcenter.com/Ultimate-Su ... 1442729.gc
I have a Motif XS8 and my Radias on it.
My Oasys is on a desk with my iMac.
This could also easily handle the Oasys and the Radias.
http://www.guitarcenter.com/Ultimate-Su ... 1442729.gc
Music is food for the soul.
iMac 24"-Logic9 Pro,Behringer X32,Roland VS2480CD,Korg Oasys88,Korg Radias, Yamaha Motif XS8, Roland Integra 7,Roland XP80,Roland VPro Session,Fender USA Strat, Gibson Les Paul USA Studio, Ovation Custom,Fender Jazzmaster Base,Roland GT6, Line6 PodXt Live. TC Helicon VoiceLive 2, Marshall JVM 410H 1960CABS. Fender Princeton Chorus.
iMac 24"-Logic9 Pro,Behringer X32,Roland VS2480CD,Korg Oasys88,Korg Radias, Yamaha Motif XS8, Roland Integra 7,Roland XP80,Roland VPro Session,Fender USA Strat, Gibson Les Paul USA Studio, Ovation Custom,Fender Jazzmaster Base,Roland GT6, Line6 PodXt Live. TC Helicon VoiceLive 2, Marshall JVM 410H 1960CABS. Fender Princeton Chorus.
Hi,
for my 2 keyboards setup I use for bottom Motif ES 8
http://www.thomann.de/de/km_18953.htm
and on top for OASYS 76
http://www.thomann.de/de/km_18952_aufsatz.htm
which is a very stable construction but not for 3 Keyboards.
When formerly gigging with 3 boards I used for bottom K2600
http://www.thomann.de/de/km_18880.htm
and 2nd tier for Trinity and 3 rd tier for Waldorf Q
http://www.thomann.de/de/km_18882.htm
but this construction became quite "high" if you want to read the display so actually the audience couldn´t see above
So I would consider to use 2 stands for 3 keyboards.
Or have you thought of a custom made? When playing only my O I use a "rudessque" rotating stand made out of a truss.
maybe this helps you to find a decision
regards
SoulBe
for my 2 keyboards setup I use for bottom Motif ES 8
http://www.thomann.de/de/km_18953.htm
and on top for OASYS 76
http://www.thomann.de/de/km_18952_aufsatz.htm
which is a very stable construction but not for 3 Keyboards.
When formerly gigging with 3 boards I used for bottom K2600
http://www.thomann.de/de/km_18880.htm
and 2nd tier for Trinity and 3 rd tier for Waldorf Q
http://www.thomann.de/de/km_18882.htm
but this construction became quite "high" if you want to read the display so actually the audience couldn´t see above

Or have you thought of a custom made? When playing only my O I use a "rudessque" rotating stand made out of a truss.
maybe this helps you to find a decision
regards
SoulBe
WOW, no.minnkorg wrote:This is the sturdiest stand out there.
If someone bumps into it, you've got gear on the floor. If you play outdoor venues and a gust of wind comes it, also gone. I'll see if I can find the footage from the keyboardist I replaced when that exact same stand took a nose dive when a gust of wind shook the stage.
-Mc
Current Korg Gear: KRONOS 88 (4GB), M50-73 (PS mod), RADIAS-73, Electribe MX, Triton Pro (MOSS, SCSI, CF, 64MB RAM), SQ-64, DVP-1, MEX-8000, MR-1, KAOSSilator, nanoKey, nanoKontrol, 3x nanoPad 2, 3x DS1H, 7x PS1, FC7 (yes Korg, NOT Yamaha).
- michelkeijzers
- Approved Merchant
- Posts: 9112
- Joined: Thu Feb 08, 2007 3:10 pm
- Location: Netherlands
- Contact:
I have an A stand, not used it on stage though but it seems very sturdy.

Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/