TR Rack PCG

ascent · Post by **ascent** » Thu Oct 28, 2010 12:21 pm

Hello,

I'm looking for the tr-rack pcg to try the new sounds in a Trinity pro x.
If anybody have that...?

best greetings

Timo · Post by **Timo** » Thu Oct 28, 2010 1:58 pm

Hi Ascent

Not sure if you know this but the TR-Rack has an additional 8mb of extra ROM waveforms over and above that of the stock 24mb waveform ROM of the standard Trinity keyboard, so any PCG for the TR-Rack will not translate correctly with a normal Trinity as many of the TR-Rack's patches will be referencing non-existing waveforms on the Trinity.

Ideally you'd need the PBS-TRI (PlayBack Sampler) option for the Trinity keyboard to obtain, compile, and employ any of the extra waveforms that the TR-Rack's PCG files use.

If you don't have the PBS don't worry, there are many great standard PCGs available for Trinity that take the Trinity way beyond the factory presets. Take a peek at the Korg Forums database.

http://www.korgforums.com/?show=1
http://www.korgforums.com/support/trinity.html

ascent · Post by **ascent** » Thu Oct 28, 2010 7:08 pm

Hi,

thank you for your answer.
I have a PBS-TRI and I think it's possible to try the PCG of the TR-RACK, but I don't find PCG and/or KSF/KMP on the net...

I have already try the PCG at the forum database.

best greeetings.

jg:: · Post by **jg::** » Fri Oct 29, 2010 12:37 am

Yes, iirc, you're quite correct - there was a sample set for PBS-TRI that was pretty close to the extra ROM in the TR-rack. So with this sample set, it's possible to get pretty close to the entire TR-rack pcg.

Unfortunately, I can't help you locate it - it must be out there somewhere, on someone's old SCSI or ZIP drive....

jg::

ascent · Post by **ascent** » Sat Oct 30, 2010 11:33 am

If anybody could save the PCG (program and combi) of a TR-Rack with Trinitro for exemple, it would be very cool...

Rick180370 · Post by **Rick180370** » Thu Oct 13, 2011 11:00 am

Just bought a second hand TR Rack, it seems to work fine but it doesn't detect any midi from my master keyboard(s), I thought it was an audio problem but when I press the A4 button I get a middle C note. I tried resetting (A4+reset on startup) but that has no effect, the display didn't indicate that it was resetting so maybe something more serious is going on

. Any suggestions would be welcome! Thanks!

foxy · Post by **foxy** » Fri Oct 14, 2011 12:05 am

Have you checked that your keyboard and the Trinity rack are both set to the same midi channel?

billbaker · Post by **billbaker** » Fri Oct 14, 2011 1:19 pm

@Rick

Sounds like the unit may be transposed UP for some reason. If your controller works correctly with other sources this would be the problem. Also, if the TR is playing "middle C note" then it IS getting a midi signal.

As to how it behaves in conjunction with your master keyboard(s), it may be more a matter of connecting the controller to the parameters you're trying to control. A deck full of knobs is useless if they're not linked to CC#s that the slaved unit can use.

Finally, make sure that memory protect (global menu) is OFF and that CC's are enabled before trying to reset or write any parameters.

BB

TR Rack PCG

TR Rack PCG

Korg TR Rack, No Midi-Input signal (?)