KRONOS DVD DRIVES
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
- Posts: 49
- Joined: Tue Dec 06, 2011 1:23 am
- Location: Houston TX USA
KRONOS DVD DRIVES
Korg recommends a DVD Drive that is not USB port-powered. I cannot find any in local stores (Houston TX).
Please respond with your experience with various port-powered drives. Let's determine which ones work for restore, and which ones do not work. Please list the make and model number of the DVD Drive you have tried and your experience with it.
Please respond with your experience with various port-powered drives. Let's determine which ones work for restore, and which ones do not work. Please list the make and model number of the DVD Drive you have tried and your experience with it.
for what it is worth, i successfully restored my Kronos using a USB powered DVD drive. The make/model was Lite-On eTDU108 External Slim DVD Drive. It was the only drive that Wal-Mart had, so I had to go with it.
Also note that when I called Korg support, they said that a non USB powered drive was recommended, but they didn't say required. It was $40 in walmart.
Also note that when I called Korg support, they said that a non USB powered drive was recommended, but they didn't say required. It was $40 in walmart.
in my other thread, someone posted the possibility of fooling the kronos by using a USB stick. i haven't tried this yet
http://www.korgforums.com/forum/phpBB2/ ... hp?t=67991
http://www.korgforums.com/forum/phpBB2/ ... hp?t=67991
-
- Posts: 49
- Joined: Tue Dec 06, 2011 1:23 am
- Location: Houston TX USA
One works -another doesn't
I purchased two USB Drives from Micro Center to see if they worked with the Kronos for boot up and restore.
Samsung SE-208AB/TSBS on sale for $32.99 - Recommended
This drive works perfectly with only one USB port connected. I tried it twice to be sure the operation was reliable. The specs state that this drive uses up to 1.4A, and supports both the Atom processor and LINUX.
LG GP10NB20 Super MultiDrive on sale for $34.99 - Will NOT work
This drive powers up and appears to read the disc, but when the Kronos red bar advances about 1 inch a message appears, System Startup Failure. Plugging into both ports had no effect. A second trial gave the same result.
Anyone who has a Kronos should consider getting the Samsung Drive. It is readily available and works great with the Kronos. It is also available from Amazon for $29.99 with free shipping.
Samsung SE-208AB/TSBS on sale for $32.99 - Recommended
This drive works perfectly with only one USB port connected. I tried it twice to be sure the operation was reliable. The specs state that this drive uses up to 1.4A, and supports both the Atom processor and LINUX.
LG GP10NB20 Super MultiDrive on sale for $34.99 - Will NOT work
This drive powers up and appears to read the disc, but when the Kronos red bar advances about 1 inch a message appears, System Startup Failure. Plugging into both ports had no effect. A second trial gave the same result.
Anyone who has a Kronos should consider getting the Samsung Drive. It is readily available and works great with the Kronos. It is also available from Amazon for $29.99 with free shipping.
Re: One works -another doesn't
Was it necessary to load the included software driver?Product Reviewer wrote:I purchased two USB Drives from Micro Center to see if they worked with the Kronos for boot up and restore.
Samsung SE-208AB/TSBS on sale for $32.99 - Recommended
This drive works perfectly with only one USB port connected. I tried it twice to be sure the operation was reliable. The specs state that this drive uses up to 1.4A, and supports both the Atom processor and LINUX.
LG GP10NB20 Super MultiDrive on sale for $34.99 - Will NOT work
This drive powers up and appears to read the disc, but when the Kronos red bar advances about 1 inch a message appears, System Startup Failure. Plugging into both ports had no effect. A second trial gave the same result.
Anyone who has a Kronos should consider getting the Samsung Drive. It is readily available and works great with the Kronos. It is also available from Amazon for $29.99 with free shipping.
Lou
-
- Posts: 49
- Joined: Tue Dec 06, 2011 1:23 am
- Location: Houston TX USA
Lou asked "Was it necessary to load the included software driver"
Answer - You simply plug the cable into the Kronos and turn it on after putting the Kronos Restore Disc (DVD #1) in the USB Drive. The drive must be powered (plugged in) to open the drawer and load the disc. This can either be done using the Kronos, or by plugging it into any USB source that supplies power to the drive. If it is done on the Kronos, you must then turn off the Kronos and wait more than 10 seconds. When you turn it back on, it boots from the USB DVD drive and the Restore Menu appears automatically.
Answer - You simply plug the cable into the Kronos and turn it on after putting the Kronos Restore Disc (DVD #1) in the USB Drive. The drive must be powered (plugged in) to open the drawer and load the disc. This can either be done using the Kronos, or by plugging it into any USB source that supplies power to the drive. If it is done on the Kronos, you must then turn off the Kronos and wait more than 10 seconds. When you turn it back on, it boots from the USB DVD drive and the Restore Menu appears automatically.
- michelkeijzers
- Approved Merchant
- Posts: 9112
- Joined: Thu Feb 08, 2007 3:10 pm
- Location: Netherlands
- Contact:
Actually Korg should let this work to via a USB thumdrive iso DVD player.Product Reviewer wrote:Lou asked "Was it necessary to load the included software driver"
Answer - You simply plug the cable into the Kronos and turn it on after putting the Kronos Restore Disc (DVD #1) in the USB Drive. The drive must be powered (plugged in) to open the drawer and load the disc. This can either be done using the Kronos, or by plugging it into any USB source that supplies power to the drive. If it is done on the Kronos, you must then turn off the Kronos and wait more than 10 seconds. When you turn it back on, it boots from the USB DVD drive and the Restore Menu appears automatically.

Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
-
- Posts: 49
- Joined: Tue Dec 06, 2011 1:23 am
- Location: Houston TX USA
MANUAL for SAMSUNG DVD WRITER that works with the KRONOS
Here is the manual for the Samsung SE-208AB USB DVD Writer that works properly with the Kronos using the Restore DVDs.
http://downloadcenter.samsung.com/conte ... 8AB_EN.pdf
Go to page 7 for the system requirements. Here you will find important data that is not included in the specification, although it is written on the box.
http://downloadcenter.samsung.com/conte ... 8AB_EN.pdf
Go to page 7 for the system requirements. Here you will find important data that is not included in the specification, although it is written on the box.
Thank you Product Reviewer
I've bought the DVD as you suggest to me by personal message (thank you
) -- Samsung SE-208AB
And then the kronos can detect the dvd, so i tried to restoring the kronos by format and full install.
But after the succesfull install the failure still there
System Startup Failure
I've bought the DVD as you suggest to me by personal message (thank you

And then the kronos can detect the dvd, so i tried to restoring the kronos by format and full install.
But after the succesfull install the failure still there
System Startup Failure
Current : KORG Kronos 73, Roland Fantom G6,
Kurzweil PC3K8, KRK RPG5, Grado 325is, Laney AH-100, Roland D-50, KORG M 1
Past : Yamaha Motif XS6, KORG M3-61 EXB Radias M256, KORG TR61, Roland Fantom X6, Roland RD700GX, Roland RD300SX, YAMAHA Psr3000, Yamaha Dx7, Roland D5
Kurzweil PC3K8, KRK RPG5, Grado 325is, Laney AH-100, Roland D-50, KORG M 1
Past : Yamaha Motif XS6, KORG M3-61 EXB Radias M256, KORG TR61, Roland Fantom X6, Roland RD700GX, Roland RD300SX, YAMAHA Psr3000, Yamaha Dx7, Roland D5
-
- Posts: 49
- Joined: Tue Dec 06, 2011 1:23 am
- Location: Houston TX USA
YOU MAY NEED WARRANTY SERVICE
Did you get the message "Installation Completed" after doing Format and Full Install? Did it respond with "Reauthorization Required? Did you try "Full Install" first as suggested in the Instructions? Please re-read the Instructions carefully.
https://www.korg.com/uploads/Support/KR ... 550000.pdf
If you have followed the instructions and have gotten the message "Installation Completed" you may need warranty service. I am very sorry you are having these problems. I am a new Kronos owner. Perhaps some more experienced owners will have some additional ideas.
https://www.korg.com/uploads/Support/KR ... 550000.pdf
If you have followed the instructions and have gotten the message "Installation Completed" you may need warranty service. I am very sorry you are having these problems. I am a new Kronos owner. Perhaps some more experienced owners will have some additional ideas.
Yes i have gotten message "Installation completed"
But after restart the kronos, system startup failure again
Is it true it happen only in 73 & 88 version kronos ?
But after restart the kronos, system startup failure again
Is it true it happen only in 73 & 88 version kronos ?
Current : KORG Kronos 73, Roland Fantom G6,
Kurzweil PC3K8, KRK RPG5, Grado 325is, Laney AH-100, Roland D-50, KORG M 1
Past : Yamaha Motif XS6, KORG M3-61 EXB Radias M256, KORG TR61, Roland Fantom X6, Roland RD700GX, Roland RD300SX, YAMAHA Psr3000, Yamaha Dx7, Roland D5
Kurzweil PC3K8, KRK RPG5, Grado 325is, Laney AH-100, Roland D-50, KORG M 1
Past : Yamaha Motif XS6, KORG M3-61 EXB Radias M256, KORG TR61, Roland Fantom X6, Roland RD700GX, Roland RD300SX, YAMAHA Psr3000, Yamaha Dx7, Roland D5
Not working


I can't beleive korg would have such bad support and product
[/quote]