USB LED light. Any possible issue?
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
-
- Approved Merchant
- Posts: 1069
- Joined: Mon Mar 19, 2007 4:38 am
USB LED light. Any possible issue?
It's my opinion that the Buttons/surface on the Kronos isn't very gig friendly on a dark stage. Especially if you have a 2nd board mounted above! Outside of the screen, it's hard to make out much of anything.
Since there are 2 Regular USB ports on the back, I'm thinking a nice USB LED light or two could be the perfect solution.
Assuming the Kronos adheres to standard USB spec, is there any reason why this wouldn't be safe to use?
Thanks!
Since there are 2 Regular USB ports on the back, I'm thinking a nice USB LED light or two could be the perfect solution.
Assuming the Kronos adheres to standard USB spec, is there any reason why this wouldn't be safe to use?
Thanks!
Korg: KRONOS 73, M50-61, 01W/r
Yamaha: Motif XS7, FS1R
Kawai K5000S, Roland JD-990 w/Vintage Synth
Yamaha: Motif XS7, FS1R
Kawai K5000S, Roland JD-990 w/Vintage Synth
-
- Approved Merchant
- Posts: 1069
- Joined: Mon Mar 19, 2007 4:38 am
-
- Approved Merchant
- Posts: 1069
- Joined: Mon Mar 19, 2007 4:38 am
Flood wrote:I'm sure Sina will come in here and talk about how he has 10,000watt blue led octopus arms on all 40 of his Kronos and Oasis'.
They cost $1000 each and money is no object when you have unlimited budget and an imaginary sugar daddy to provide it.
ROFLMAO Flood!!!!
Korg: KRONOS 73, M50-61, 01W/r
Yamaha: Motif XS7, FS1R
Kawai K5000S, Roland JD-990 w/Vintage Synth
Yamaha: Motif XS7, FS1R
Kawai K5000S, Roland JD-990 w/Vintage Synth
- michelkeijzers
- Approved Merchant
- Posts: 9112
- Joined: Thu Feb 08, 2007 3:10 pm
- Location: Netherlands
- Contact:
I also use them (not on stage but in the rehearsal room) ... works fine.
Cost: 3 euro (in the Netherlands).
Cost: 3 euro (in the Netherlands).

Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
You can take 500mA from each port. For instance, I use an unpowered DVD drive on the K61 which plugs into both ports in order to share the current. It says 2A on the drive but that's probably when it's writing. No problems so far, including installing a 120GB drive which took ages to load the system from the factory DVDs.
Bryan
Bryan
What a great idea guys, thank you for sharing it.
Current Equipment:
Korg Kronos 2 88, Reface CS, Roland JV-1080, TE OP1, Moog Subsequent 37, Korg ARP Odyssey, Allen & Heath Zed 18, Adam F5, MOTU MIDI Express XT, Lexicon MX200 & MPX1, Yamaha QY700, Yamaha AW16G, Tascam DP008ex, Zoom H6, Organelle, Roland J6 & JU06A
Previous: Triton LE 61/Sampling/64MB/4GB SCSI, MS2000BR, Kronos 1 61, Monotribe, NanoKontrol, NanoKeys, Kaossilator II, Casio HT3000, Roland VP-03, Reface DX, Novation Mininova, MPC One
Korg Kronos 2 88, Reface CS, Roland JV-1080, TE OP1, Moog Subsequent 37, Korg ARP Odyssey, Allen & Heath Zed 18, Adam F5, MOTU MIDI Express XT, Lexicon MX200 & MPX1, Yamaha QY700, Yamaha AW16G, Tascam DP008ex, Zoom H6, Organelle, Roland J6 & JU06A
Previous: Triton LE 61/Sampling/64MB/4GB SCSI, MS2000BR, Kronos 1 61, Monotribe, NanoKontrol, NanoKeys, Kaossilator II, Casio HT3000, Roland VP-03, Reface DX, Novation Mininova, MPC One
Re: USB LED light. Any possible issue?
---------------------------------------------------------------------------------------NuSkoolTone wrote:It's my opinion that the Buttons/surface on the Kronos isn't very gig friendly on a dark stage. Especially if you have a 2nd board mounted above! Outside of the screen, it's hard to make out much of anything.
Since there are 2 Regular USB ports on the back, I'm thinking a nice USB LED light or two could be the perfect solution.
Assuming the Kronos adheres to standard USB spec, is there any reason why this wouldn't be safe to use?
Thanks!
If it runs a DVD from the usb's then the lights should not be a problem. Couple of things, shame that Korg didn't,t put a VHS out on the board, but I,m kinda hoping that if the editor, or either the iPad connections can be achieved this may solve a huge problem with both screen size and not being able to relay it to a bigger display.? Ie iPad, and certainly when it's under another 1 or two boards this would be great. Could be a huge advantage. I like to have my best board on the bottom run, so this would be a great benefit
Making music is a passion, not a choice of lifestyle
-
- Platinum Member
- Posts: 7860
- Joined: Fri Jul 29, 2011 7:23 am
+1Flood wrote:I'm sure Sina will come in here and talk about how he has 10,000watt blue led octopus arms on all 40 of his Kronos and Oasis'.
They cost $1000 each and money is no object when you have unlimited budget and an imaginary sugar daddy to provide it.

~*<b>Dr. Ven</b>*~
My Gear : -
Korg Kronos2 61 | Roland FA 06 (fully loaded) | Yamaha Motif XF6 | Apogee Duet | Nektar Panorama 61 | Logic X Pro | Yamaha DX7 IIFD | Fender Custom Stratocaster
My Gear : -
Korg Kronos2 61 | Roland FA 06 (fully loaded) | Yamaha Motif XF6 | Apogee Duet | Nektar Panorama 61 | Logic X Pro | Yamaha DX7 IIFD | Fender Custom Stratocaster