Kronos OS Update to 2.10 announced
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
I haven't updated my K61 yet, but I would like to personally thank Korg or whomever provided this update. I authored a topic named "Leslie Sims". I simply asked for a more realistic rotary sim. Any improvement was appreciated and from what I read, this is definitely a step in the right direction.
Thank you Korg for continued support of this fine machine. One other asked favor was to make the M1 sounds available for the Kronos as the Krome.
A still loyal and content customer!!!
Kenny59
Thank you Korg for continued support of this fine machine. One other asked favor was to make the M1 sounds available for the Kronos as the Krome.
A still loyal and content customer!!!
Kenny59
Sub-System_604
Hi! Maybe I'm just dreaming out loud here but firmware "Sub-System_604" does sound a little bit meaningful to me, esspecialy "604" value.
I know it's all about USB 3.0 support and lovely boot up screen but could it also be something that will give our Kronoses support for 64 bit OS upgrade in the future?
Coincidence or is it just my another conspiracy theory?
I know it's all about USB 3.0 support and lovely boot up screen but could it also be something that will give our Kronoses support for 64 bit OS upgrade in the future?
Coincidence or is it just my another conspiracy theory?

Kronos 88, Farfisa F1, nanoPAD2, Casio SA-10 

Are you sure? I updated the firmware first. There's no way I can install the new OS. At least I didn't find a way.Sharp wrote:Nope. Well, it's not written in any of the manuals.Bertotti wrote:Does it matter which update is done first? Firmware or OS?
I went in order of downloading from KORG's website, so the OS got updated before the firmware on my KRONOS.
Regards
Sharp.
http://www.korgforums.com/forum/phpBB2/ ... 290#568290
The thumbwheel was my issue. Wow was I twisted......, wasn't just about the Kronos.Bertotti wrote:I seem to remember last time I downloaded something one of the thumb drives I had worked and the other didn't. No clue why but it had me going for a couple days. I have to get this update in though. I bought the Kronos #1 for the organs! Especially pipes! I won't turn down a good cx3! I wish you the best of luck with your ordeal! I think I might wait until morning myself to try, probably better off since it has been a very challenging day already.
Thanks for the support Bertotti be well.
The thumbwheel was my issue. Wow was I twisted......, wasn't just about the Kronos.Bertotti wrote:I seem to remember last time I downloaded something one of the thumb drives I had worked and the other didn't. No clue why but it had me going for a couple days. I have to get this update in though. I bought the Kronos #1 for the organs! Especially pipes! I won't turn down a good cx3! I wish you the best of luck with your ordeal! I think I might wait until morning myself to try, probably better off since it has been a very challenging day already.
Thanks for the support Bertotti be well.
Funny, I do not get the 9 engine pictures when I boot up?shaneblyth wrote:https://www.dropbox.com/s/rlntyj0b0lrn2hg/Kronos21.JPGapex wrote:Please take pics of the new boot up screen. I'm very anxious to see it. My kronos is on its way in from Sweetwater. Brand new Keybed replacement (under warranty). I can't wait to get it back, I hope the installed the new os for me. That would be awesome.
Did you do the firmware upgrade? It is part of that, not the OS upgradeDiego5150 wrote:Funny, I do not get the 9 engine pictures when I boot up?shaneblyth wrote:https://www.dropbox.com/s/rlntyj0b0lrn2hg/Kronos21.JPGapex wrote:Please take pics of the new boot up screen. I'm very anxious to see it. My kronos is on its way in from Sweetwater. Brand new Keybed replacement (under warranty). I can't wait to get it back, I hope the installed the new os for me. That would be awesome.
My mostly Kronos videos:
http://www.youtube.com/channel/UCOeCfUbowBoVIw-tWn0nMcQ
http://www.youtube.com/channel/UCOeCfUbowBoVIw-tWn0nMcQ
All is great! Update went well, did the os then mrs then preload. Now when i did the preload I only uploaded the cx3 stuff, will I be missing anything? I couldn't see changing everything else when my impression it was all cx3 related anyway. So if you think I messed up please let me know.
I see pig tools is going to be a must. I will need to see if it is still available.
Off to the firmware update next. Thanks everyone!
FYI the thumb drive that didn't work for me in the past did work this time after a full format to fat 32. I didn't intentionally use the one that didn't work it was an accident I realized after the fact.
firmware was updated no problem!
Now I am tagging these two thumb drives as specific for my Kronos.
I see pig tools is going to be a must. I will need to see if it is still available.
Off to the firmware update next. Thanks everyone!
FYI the thumb drive that didn't work for me in the past did work this time after a full format to fat 32. I didn't intentionally use the one that didn't work it was an accident I realized after the fact.
firmware was updated no problem!
Now I am tagging these two thumb drives as specific for my Kronos.

Last edited by Bertotti on Sat Nov 09, 2013 4:19 pm, edited 1 time in total.
Updating is done, no problem at all, as long as you make your backup.
Wow, finally a live mute feature, just what I needed, not only on the Kronos, but also on the M3; I had to abuse Karma for the same result. Anyway, works perfect for me.
And yes, the CX3 sounds really great now, can't wait to use it in the live gig. Thanx Korg for this wonderful improvement on this power machine!
Wow, finally a live mute feature, just what I needed, not only on the Kronos, but also on the M3; I had to abuse Karma for the same result. Anyway, works perfect for me.
And yes, the CX3 sounds really great now, can't wait to use it in the live gig. Thanx Korg for this wonderful improvement on this power machine!
Korg Kronos 73 (upgrade kit), Nanopad 2, Cakewalk Sonar Producer, Musescore.org
-
- Platinum Member
- Posts: 3093
- Joined: Sun Jun 19, 2011 11:06 pm
- Location: Toronto, Ontario, Canada
Since the new cx-3 sounds go into banks that already have sounds in them, I guess that means I have to relocate my sounds in order to make room for the new ones. Is this right and is there an easy way of doing. Bulk transfer to an empty band?
If music is the food of love, play on and play loud!
Gear: Kronos 73, Wavestation EX, Polysix, King Korg, Monotron and Monotron Duo, Minikorg, Moog Grandmother, my very old MiniKorg, 4 acoustic and 9 electric guitars, 1 Ibanez 5 string bass, a Steel guitar, a bunch of microphones, 2 pairs of studio monitors and other very cool toys, 1 wife and 4 cats and a lava lamp!
Gear: Kronos 73, Wavestation EX, Polysix, King Korg, Monotron and Monotron Duo, Minikorg, Moog Grandmother, my very old MiniKorg, 4 acoustic and 9 electric guitars, 1 Ibanez 5 string bass, a Steel guitar, a bunch of microphones, 2 pairs of studio monitors and other very cool toys, 1 wife and 4 cats and a lava lamp!
No reason to do anything unless you want to keep the handful of old organ sounds. Not that many really. I couldn't see a reason to do anything except load the new ones.jeremykeys wrote:Since the new cx-3 sounds go into banks that already have sounds in them, I guess that means I have to relocate my sounds in order to make room for the new ones. Is this right and is there an easy way of doing. Bulk transfer to an empty band?
My mostly Kronos videos:
http://www.youtube.com/channel/UCOeCfUbowBoVIw-tWn0nMcQ
http://www.youtube.com/channel/UCOeCfUbowBoVIw-tWn0nMcQ
-
- Senior Member
- Posts: 430
- Joined: Sat Dec 10, 2011 2:06 pm
+1!mathieumaes wrote:The new CX-3 engine sounds a lot better, and those KRS-06 patches are superb. Thanks Korg!
Ad
Current gear : Korg Kronos 88 (SN 0979) / Nektar LX88+ / Korg PA2X / Kurzweil K2500R / Korg Nanopad2 / Neo Ventilator / Akai EWI USB / Cantabile / Reaper / Cakewalk / Reason / way too many VST's
Current gear : Korg Kronos 88 (SN 0979) / Nektar LX88+ / Korg PA2X / Kurzweil K2500R / Korg Nanopad2 / Neo Ventilator / Akai EWI USB / Cantabile / Reaper / Cakewalk / Reason / way too many VST's
No I had a wonderful time with the OS so I figured I would keep my sanity and do the lawn & workout instead.ed_f wrote:Did you do the firmware upgrade? It is part of that, not the OS upgradeDiego5150 wrote:Funny, I do not get the 9 engine pictures when I boot up?
Now I will aggravate myself again.
Thanks for the info ed.