Tr rack loading and storage programs PCG from computer?

xcracerman · Post by **xcracerman** » Sun May 12, 2013 7:54 pm

How do I upload files from my computer (PCG filles) to Korg Tr Rack? (Only cable Host?)
Is there any other alternative?
I instaled Kevin Goodman' Trinitro.
Raphael

synthjoe · Post by **synthjoe** » Sun May 19, 2013 6:10 pm

Trinitro is your best bet.
You can use both MIDI and To Host, the latter is effectively a MIDI port once the driver is properly installed (also, the cable is a bit finicky - so perhaps you're better off with a generic, but reliable MIDI interface).

Do you experience some sort of a problem with Trinitro, or why are you looking for another alternative?

xcracerman · Post by **xcracerman** » Mon Oct 14, 2013 4:15 pm

Can I use this program Trinitro (is free) to transfer files PCG to korg tr rack?

How do I connect Tr rack? Through MIDI IN - USB?

Spacecowboy · Post by **Spacecowboy** » Tue Oct 15, 2013 9:26 am

just hook the TR RACK with a midi usb, turn on Trinitro, and if you miss selecting the rack, you can do it in tools menu, select the tr-rack as the keyboard or module. then you should be able to receive your current PCG, save it and send your new one.

michelkeijzers · Post by **michelkeijzers** » Tue Oct 15, 2013 10:08 am

You also can try PCG Tools ... it's free.
See for more information the link in my signature.

xcracerman · Post by **xcracerman** » Fri Oct 25, 2013 12:56 pm

Spacecowboy wrote:just hook the TR RACK with a midi usb, turn on Trinitro, and if you miss selecting the rack, you can do it in tools menu, select the tr-rack as the keyboard or module. then you should be able to receive your current PCG, save it and send your new one.

Thanks for your help!
Next week I will have Tr rack (

) and I tried to connect it to a PC. I will let you know how I did it.

xcracerman · Post by **xcracerman** » Tue Nov 12, 2013 9:52 pm

I connected a wire rack Tr MIDI IN / OUT - USB and can not send PCG.

Spacecowboy which connected the Tr rack to a PC (I have win 7/32 bit)?
The program trinitro I set "options"> USB,the same channel in program and module.

Spacecowboy · Post by **Spacecowboy** » Thu Nov 14, 2013 7:58 pm

I HAVE WINDOWS 7 32 AND 64 AND IT WORKS

xcracerman · Post by **xcracerman** » Sun Nov 17, 2013 8:08 pm

Everything I do as you write.
1 The trinitro-registered.
2 Midi tr rack channel is the same as in trinitro.
3 exclusive and choose ENA (before I had the DIS!)
4 I turned on the Trinitro: View> Options> midi:
tr rack, midi output I have USB 2.0 and USB 2.0 MIDI input

When I do get from Trinity or send from Trinity shows the message "No response from trinity".
I've tried two cables, MIDI / USB but I think the they were cheap because I do not have a connection .....? ......

Spacecowboy · Post by **Spacecowboy** » Mon Nov 18, 2013 4:33 am

make sure you're using midi in/out not through. try switching the in and out cables.

xcracerman · Post by **xcracerman** » Mon Nov 18, 2013 8:01 pm

I changed cables midi out / in but it did not help.

In a few days I'll have a host PC cable and I'll try this method.

Spacecowboy · Post by **Spacecowboy** » Tue Nov 19, 2013 5:47 am

have you tried changing the pc select from 31.25bps to 38.4bps? page 16 in global.

xcracerman · Post by **xcracerman** » Tue Nov 19, 2013 7:42 pm

I have 38,4

paradox · Post by **paradox** » Mon Dec 02, 2013 7:27 am

Hi all,

Just thought i'd chime in with my experience using this page...

Using Trinitro, a Roland UM-ONE usb to MIDI cable and a laptop itself was all i needed to connect and edit patches.

xcracerman · Post by **xcracerman** » Mon Dec 02, 2013 3:23 pm

Can you load any sound (PCG) from PC to Tr rack?
What is your system in a laptop? Win 7 (64bit)?

Korg Forums

Tr rack loading and storage programs PCG from computer?

Tr rack loading and storage programs PCG from computer?

yes

Re: yes

try switching the midi cables

SPEAKING OF THAT........