I was wondering is SSD SATA 3 (high speed) and the 4Gb now supported by the operating system, or is it still SATA 2 and the 4Gb limited to 3Gb?
Regards
Olaf
OS 2.0.2 released!!!
Moderators: Sharp, X-Trade, Pepperpotty, karmathanever
Not sure about the support for SATA3 - some users have reported success in the past with SATA 3.Olaf wrote:I was wondering is SSD SATA 3 (high speed) and the 4Gb now supported by the operating system, or is it still SATA 2 and the 4Gb limited to 3Gb?
Regards
Olaf
The inability to use the full 4 GB of RAM is not an operating system limitation, rather it is a combination of a 4 GB limit on addressable memory and the use of memory-mapped IO for some devices.
Current Equipment:
Korg Kronos 2 88, Reface CS, Roland JV-1080, TE OP1, Moog Subsequent 37, Korg ARP Odyssey, Allen & Heath Zed 18, Adam F5, MOTU MIDI Express XT, Lexicon MX200 & MPX1, Yamaha QY700, Yamaha AW16G, Tascam DP008ex, Zoom H6, Organelle, Roland J6 & JU06A
Previous: Triton LE 61/Sampling/64MB/4GB SCSI, MS2000BR, Kronos 1 61, Monotribe, NanoKontrol, NanoKeys, Kaossilator II, Casio HT3000, Roland VP-03, Reface DX, Novation Mininova, MPC One
Korg Kronos 2 88, Reface CS, Roland JV-1080, TE OP1, Moog Subsequent 37, Korg ARP Odyssey, Allen & Heath Zed 18, Adam F5, MOTU MIDI Express XT, Lexicon MX200 & MPX1, Yamaha QY700, Yamaha AW16G, Tascam DP008ex, Zoom H6, Organelle, Roland J6 & JU06A
Previous: Triton LE 61/Sampling/64MB/4GB SCSI, MS2000BR, Kronos 1 61, Monotribe, NanoKontrol, NanoKeys, Kaossilator II, Casio HT3000, Roland VP-03, Reface DX, Novation Mininova, MPC One
-
michelkeijzers
- Approved Merchant
- Posts: 9112
- Joined: Thu Feb 08, 2007 3:10 pm
- Location: Netherlands
- Contact:
The last item has been discussed in detail: 3 GB.
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
-
michelkeijzers
- Approved Merchant
- Posts: 9112
- Joined: Thu Feb 08, 2007 3:10 pm
- Location: Netherlands
- Contact:
I have asked Sharp to upload the latest PCG Tools Manual.
It already supports 2.0.
However what might be of interest for you: it also contains a mini manual to connect your Kronos/Kronos X with help of a free FTP program to your computer. It actually is very simple but still I added several screen shots and steps to follow.
Besides using for samples, it also makes the use of PCG Tools even simpler as it is no longer needed to swap an USB stick back and forth your computer.
I hope it will be uploaded soon by Sharp.
It already supports 2.0.
However what might be of interest for you: it also contains a mini manual to connect your Kronos/Kronos X with help of a free FTP program to your computer. It actually is very simple but still I added several screen shots and steps to follow.
Besides using for samples, it also makes the use of PCG Tools even simpler as it is no longer needed to swap an USB stick back and forth your computer.
I hope it will be uploaded soon by Sharp.
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
-
michelkeijzers
- Approved Merchant
- Posts: 9112
- Joined: Thu Feb 08, 2007 3:10 pm
- Location: Netherlands
- Contact:
Btw, I use a Sitecom LN-030 USB-LAN adapter and it works flawlessly.
Developer of the free PCG file managing application for most Korg workstations: PCG Tools, see https://www.kronoshaven.com/pcgtools/
2.02 hier gaat ie goed!
Another (perfect working) "link" (UK) to the download;
http://www.korg.co.uk/support/downloads/kronos_dl.php
robbie
Last edited by robbie50 on Thu Aug 09, 2012 9:55 am, edited 2 times in total.
I use a Taperecorder too......
Interesting list of bug fixes here:
https://www.korg.com/Services/Kronos_So ... ote_E1.pdf
I hadn't even heard of some of these bugs. Well done Korg
Now there's only a short wait for the new Editor at the 'end of August'
https://www.korg.com/Services/Kronos_So ... ote_E1.pdf
I hadn't even heard of some of these bugs. Well done Korg
Now there's only a short wait for the new Editor at the 'end of August'
Kronos 61 & KK KARMA / Triton Ex c/w MOSS and TR KARMA / MS2000 / Radias / Kaossilator Pro & Kaossilator / Korg Kontrol 49 / Nanopad / Novation Nova / Waldorf Blofeld
Line 6 Flextone XL / Line 6 POD XT / Roland V Bass / Ampeg Portabass & Cab / Assorted Guitars (no whammy bar) ... and a Fender Champ ...
Line 6 Flextone XL / Line 6 POD XT / Roland V Bass / Ampeg Portabass & Cab / Assorted Guitars (no whammy bar) ... and a Fender Champ ...
-
Yuma
- Platinum Member
- Posts: 659
- Joined: Wed Jul 13, 2011 12:47 am
- Location: The Netherlands
- Contact:
Updated to OS 2.0.2 without any issues.
Like Qui I noticed that I have a little bit more RAM free now.
I went from 23MB to 66MB free.
I've also set the IP and FTP settings correctly (I don't use DHCP on my small home network).
Now I need to buy an ethernet adapter.
Like Qui I noticed that I have a little bit more RAM free now.
I went from 23MB to 66MB free.
I've also set the IP and FTP settings correctly (I don't use DHCP on my small home network).
Now I need to buy an ethernet adapter.
|| My music ■■ How to embed Youtube and Soundcloud on this forum ||
|| Korg Kronos 61 (with upgrade kit) ■■ Korg PadKontrol ■■ Cubase 5 ||
|| Korg Kronos 61 (with upgrade kit) ■■ Korg PadKontrol ■■ Cubase 5 ||
Worked very good! (but M3 OS 2.04 features still missing)
Update was fast and no problem at all. Thank you Korg!
I still wonder if and when we get the sequencer features from the 2.04 M3 Update!? I really need that note based MIDI event and Piano Roll editor under the "Track Edit" tab. Anybody listening?
I still wonder if and when we get the sequencer features from the 2.04 M3 Update!? I really need that note based MIDI event and Piano Roll editor under the "Track Edit" tab. Anybody listening?
|'|'||'|'|'||'|'| / Physis Piano H1 / Roland Fantom G6 + ARX-01 & 02 / M3 61 & EXB-Radias & 256 MB / Arturia vCollection 3 / KLC / Minimonsta / Kawai K5000 S + R / Moog Little Phatty Stage II / Novation Ultranova / Roland JX-305 / TE OP-1 / iPad & microKey 25 & iODock. / Yamaha Rm1x & QY100 / Logic 9 & Mainstage |'|'||'|'|'||'|'|
-
ScoobyDoo555
- Platinum Member
- Posts: 837
- Joined: Sat Jan 12, 2008 4:13 pm
- Location: Herefordshire, UK
- Contact:
Flawless install unlike 1.6
Dan
unlike 1.6 Dan
Yamaha SY77 & KX88, SSL Nucleus, Korg Kronos 61, Wavestation A/D, Access Virus B, Roland XP30, DeepMind12D, System 1m, V-Synth XT, Focusrite Red16Line, Unitor 8, Akai S3000 XL, Alesis Quadraverb+, Focal Shape Twins, Full fat iMac, Logic Pro X, ProTools 2021, loadsa plugins.
Outstanding! New editor?....Lets hope its really new! Either way...wonderful!
http://soundcloud.com/ronf-3/sets/ronf-music
https://www.youtube.com/channel/UCr1zAK ... LQZrUYGPQA
Favorite Gear: Kronos 61, M3, Z1, Radias, KPro, KP3, Moog Voyager, Foogers, Virus TI, Jupiter 80, Integra7, GAIA, SPD-30, Kiwi 106, RE-201, MC808, RC505, MV8800, DSI P6 and OB6 and P12, Ensoniq SQ80, EMU MP-7, Eventide H7600, Eclipse, SPACE, Pitchfactor, Timefactor, Looperlative LP-1, Axe FX Ultra, Nord Modular, DSI Tetra, Tempest, PEK, JDXA, Eurorack Modular, Octatrack, MDUW, Monomachine, A4, RYTM, Waldorf Q Phoenix, MWXTk, Blofeld, TR8.
https://www.youtube.com/channel/UCr1zAK ... LQZrUYGPQA
Favorite Gear: Kronos 61, M3, Z1, Radias, KPro, KP3, Moog Voyager, Foogers, Virus TI, Jupiter 80, Integra7, GAIA, SPD-30, Kiwi 106, RE-201, MC808, RC505, MV8800, DSI P6 and OB6 and P12, Ensoniq SQ80, EMU MP-7, Eventide H7600, Eclipse, SPACE, Pitchfactor, Timefactor, Looperlative LP-1, Axe FX Ultra, Nord Modular, DSI Tetra, Tempest, PEK, JDXA, Eurorack Modular, Octatrack, MDUW, Monomachine, A4, RYTM, Waldorf Q Phoenix, MWXTk, Blofeld, TR8.
-
PianoManChuck
- Platinum Member
- Posts: 832
- Joined: Tue Aug 09, 2011 10:14 pm
- Location: Los Angeles, CA
- Contact:
I'm usually one of the first to install a new OS release!
This time, however, I think I'm going to hold off until the end of the month because its a MAJOR release (1.xx to 2.xx). The new editor v2.xx won't be released until the end of the month anyway, so it makes sense to hold off and see how that goes.
In the meantime, 1.6x is working perfectly for me, so I think I'll keep it that way for a while. This way I can read about everyone's experiences and make an informed decision about upgrading later.
This time, however, I think I'm going to hold off until the end of the month because its a MAJOR release (1.xx to 2.xx). The new editor v2.xx won't be released until the end of the month anyway, so it makes sense to hold off and see how that goes.
In the meantime, 1.6x is working perfectly for me, so I think I'll keep it that way for a while. This way I can read about everyone's experiences and make an informed decision about upgrading later.
Check me out at <a href="http://www.youtube.com/user/PianoManChu ... anChuck</a>
-
rs.felicio
- Approved Merchant
- Posts: 307
- Joined: Fri Dec 30, 2011 5:20 pm
- Location: São Paulo - Brasil